Farrafen wind compressor
may also have different names such as driver, air compressor, air pump or wind pump. The basis of this device is to produce high pressure wind. This is done in the compressor tank.
The air inside the compressor compartment is heavily compressed and exits with high pressure as he exits the tank. This is a high -pressure wind and is needed for use in various industries.
The wind compressor is widely used that has produced compressor in different types.
Types of Wind Compressor and their Application
There are generally three types of compressors with different wind production and production. There are three types of piston wind pumps, screws and high -pressure compressors.
piston compressor and its application
Piston compressor is more commonly used in manufacturing and industrial sectors. The compressor is also used in the service industry and has a capacity of 25 and 50 liters. The wind pressure in the piston compressor is between 8 and 10 times. To increase wind pressure on this device, the tank storage and wind speed should be increased. This compressor has a tank where the air is compressed.
The number of pistons in this type of compressor can be increased and enhanced its capacity.
This compressor can be used for spraying, cleaning work, etc.
Screw wind compressor
Another compressor with high wind capacity is the screw compressor. If compressed air and high wind levels are low in time, it is recommended to use this compressor.
In the screw compressor, air compression operations are carried out using two spiral motors. The air storage in this type of compressor is also done inside the air tank and the tank parts are placed on the cover.
Different parts of the screw wind compressor include: Air, electromotor, air intake, air and oil separation tank, radiator, filter and electrical panel.
Outgoing air pressure from this compressor is between 8 and 10 times. Of course, the volume of air in the screw compressor is far greater than the piston. Another advantage of the screw is the less sound that the device produces.
High Pressure Compressor
In some industries, high -pressure winds are needed. For example, to produce plastic bottles, high pressure must be applied to the raw material to open the bottle and take full shape. This air pressure is also needed in packaging centers. Pressure over 30 times is used for these uses, which is not supplied in screw and piston compressors.
High -pressure compressor is used for industrial use. In this compressor, high pressure air is pushed out to provide the force needed for industrial and manufacturing uses.
Selection of the Suitable Wind Compressor
Before you buy a wind compressor, you should consider what you will use for it for.
if the compressor pressure is more than needed. On the other hand, the pressure is less than needed for the required work to do well. Therefore, the compressor should be selected to suit the applicable that is expected.
How to Use Wind Compressor
How to launch a wind compressor and proper use of this device requires specific safety principles and instructions. First, the proper installation of the device in a suitable environment with sufficient ventilation should be ensured. Before turning on the compressor, the oil level, filters and fittings should be examined. When used, adjusting the output pressure tailored to the needs of the tool is very important. The condensed water discharge system should be controlled and discharged regularly. Standard hoses and fittings should also be used. At the end of the work, you need to drain the tank pressure and turn off the main key of the device. Regular maintenance, including oil replacement, filters replacement, and periodic inspection of parts, are essential to extend the useful life of the device.
Important Tips on Buying Wind Compressor
To buy a wind compressor you need to pay attention to different factors; The most important of these factors are the following:
1. Type and Model of Air Compressor
Select the appropriate type of wind compressor (piston, screw, diaphragm, centrifuge), according to your specific needs when purchasing a wind compressor, is of great importance.
2. Wind compressor tank volume
Compressor tank volume is one of the most important factors to consider when shopping. A larger tank allows you to use compressed air for a longer time.
3. Working Pressure (PSI)
Working Pressure (PSI) The compressor must be fully compatible with the needs of your tools and equipment; Because many wind tools need special pressure and your compressor must be able to supply this pressure.
4. Air Flow Rate (CFM)
Air Flow rate (CFM) in wind compressors indicates the amount of compressed air that the compressor can produce. This should be compatible with the needs and equipment you intend to use.
5. Construction quality and durability
Try to look for high quality compressors and reputable brands when purchasing the compressor. Durable compressors usually have a longer life and are less in need of maintenance.
