Compare Sandblast with other methods of cleaning; Why is Sandblast a better choice?

What is the

What is a Sandblast and How is it done?

Overview of the common surface cleaning methods

wash with chemicals Detergents, acids and solvents are used to clean and remove stains, fat or sediment.

Waterjet (Pressure Washing) This method uses extremely high pressure water and separates the pollutants from the surfaces.

Mechanical cleaning (sanding and rotating machines) In this method, the surface is physically erased and erased by electric or wind instruments.

Comparison of Sandblast with Other Cleaning Methods

Sandblast has many advantages over manual cleaning:

High Speed: High Speed: In a short period of time, a large volume of cleansing is cleaned.

Deep Effect: Abrasive particles penetrate the depths of the pores and completely separate the alarm or color.

Uniformity and quality: The result is uniform and the entire surface is ready. Human beyond is much less.

The use of chemicals, although in some cases is a cost -effective response, has its own disadvantages:

Damage to the operator and surface: Direct contact with acid or solvents results in burns or skin damage and sometimes damage the surface.

damage to the operator and surface: Direct contact with acid or solvents results in burns or skin damage and sometimes causes damage to the surface. Is.

Sandblast against Industrial Waterjet Industrial waterjet with high water pressure can cleanse contamination, dust and part of color or sediment, but:

cannot remove hard rusting or thick layers of coating.

is not suitable for water -sensitive surfaces and some materials in contact with water are decayed.

Restrictions on surface preparation for staining or coating.

It is possible to damage the surface and create a wave or scratch.

cannot be used in blind spots, corners or corners.

The operator's safety is less and the risk of particle launch or cut is greater.

Why is Sandblast a better choice?

Disadvantages and Restrictions of Sandblast

Important Tips in Selecting Cleaning

Type of Level: Metal or Concrete type or… and sensitivity to water or chemicals

The ultimate goal: staining, coating, beautifying or eliminating the full pollution

Cost, time and ease of implementation: Sandblast is usually more economical and faster than other methods; Especially on a large scale

Safety and Environment: Sandblast uses the most damage to the environment by using abrasives and dust collection

common applications of documentation

Pre -staining steel structure or niche

Removing the paint and decay of ships and boats

Cleaning of oil tanks and fluid transmission pipes

Cleansing of auto parts, industrial parts, beams and columns (Decorative)