اهمیت نگهداری و سرویس دستگاه خرمنکوب در مزارع

Introduction to the main components of the threshing machine

To better maintain, it is important to identify the main components of the threshing machine:

Each of these sections requires regular review of the operator and the user.

Primary Service of the Harvesting Machine before the start of the harvest season

Before the start of each crop season, the initial service of the Crusher is required. The following steps should be followed:

1. Careful review of the device in terms of appearance, cracks or chassis failure 2. Control the amount of engine oil and gearbox and replacement if needed 3. Examine the status of straps, wheels and replacement of worn straps 4. The electrical system of electrical system 5. Psychoanalysis and psychoanalysis of all bearings and moving parts 6. Control and sharpen the blades

Regular implementation of this jacket greatly reduces the likelihood of failure to work.

نکات مهم نگهداری روزانه دستگاه خرمنکوب در زمان کار

1. Cleansing of dust and plant residues from the surface and inside the car 2. Examine the loose or not stiffness of the screws and joints 3. Control of oil leakage or fuel 4. Examine the health filter and replacement in the closure 5. Correct the function of the blades, the separator arm and the belts 6. Consciousness of moving the moving parts 7. Singing an abnormal sound or tremor during work

Paying attention to this jacket increases the life of the grief machine and continuous operation.

Periodic service guide

Check the engine oil level and replace if necessary. The engine air filter should be controlled once every 2-5 days and replaced if needed. Glove kidney bearings and bearings every month or after every 2 hours of work. Visit the blades of the machine every month and in the event of a slowdown or replacement. Different sections of straps and chains control in terms of health and stretching.

also the service of the carrot machine by the specialized team of Tabriz Farmest Gostar Company will guarantee long -term health and increased productivity.

اهمیت استفاده از قطعات یدکی اصل شرکت مزرعه گستر تبریز

One of the serious challenges of the owners of the Crubby machine is the supply of standard and high quality spare parts. The use of non -interconnected parts cause early failure, reduced efficiency, increased fuel consumption and even damage to other components of the machine. Gostar Gostar Tabriz Company has made it easy for customers to support and serve the Corporate Machine.

نقش آموزش اپراتور در نگهداری و سرویس دستگاه خرمنکوب

An expert and trained operator can obtain the highest productivity from the bushes. For its customers, Farmeh Gostar Tabriz is conducting free use and maintenance training courses to keep the device performance at best. Training includes understanding the device parts, service methods, safety tips, and solutions to common flaws.

Safety Tips during service and maintenance

observing safety tips to prevent any injury and accident;

Always turn off the device before the service and from the power supply or engine. Use gloves and safety glasses. Never approach the device when rotating the blades or moving the straps. Use the right tools and original parts for repair. Before re -launching the device, make sure the device is left in the device.

رایج‌ترین اشکالات دستگاه خرمنکوب و راه‌های رفع آن

Reduce the speed or power of the device Cause: Burnout or lack of engine oil, blades slowing down, or foreign body stuck Solution: Checking the oil level, sharpening the blades and clearing the machine Create abnormal sound Cause: loose strap or bearing damage Solution: Tighten or replace the belt and bearings

Failure to separate grain and straw Cause: Burnout or Development of the Blade Solution: Switching or sharpening the blade Increase fuel consumption Cause: Filter cramps, exhaust parts, lack of engine adjustment Solution: Full Engine Division Service and Filter Replacement

Why the Corporation Service by Farmeh Gostar Tabriz Company?

Gostar Tabriz Farm Company provides a comprehensive support using specialist forces, providing on -site support services, supplying original parts, and holding training courses for the owners of the Corpusment.

These services include primary service, periodic service, supply, specialized repairs and free consulting. Any need for services will be done by phone or registering a request on the company site at a speed.

نحوه سفارش خدمات سرویس و نگهداری دستگاه خرمنکوب شرکت مزرعه گستر تبریز

Farmers and owners of the Crusader can apply for advice, training, service or purchase of original spare parts:

phone call to company after -sales service center Registration of a request at Tabriz's official farm site Visit to Service and Agency Centers in East Azarbaijan Province and across the country

Gostar Tabriz Farm Company expands the dealership and support network to provide customers with the fastest and safest possible way.

The impact of proper maintenance on the life and efficiency of the scrub

Statistics show that devices that have regular service and maintenance, in addition to reducing the cost of repair and failure, achieve more harvest efficiency. This leads to more profitability of the farmer and preventing work from stopping in the harvest season.

ویژگی‌های خدمات سرویس و نگهداری دستگاه خرمنکوب شرکت مزرعه گستر تبریز

1. The use of experienced experts 2. Provide free training to device owners 3. Emine Spare Parts Original, with Quality Guarantee 4. Fast and affordable services 5. Clocking and online telephone and online

The final summary and recommendation

Maintenance and service is a vital step to ensure profitability and productivity in mechanized agriculture. As one of the pioneers of the production and after -sales service industry, Tabriz Farmeh Gostar Tabriz is ready to provide any consulting, periodic services and supply of original spare parts. Experience product quality and reduced operating costs by delivering service and maintenance of the Tabriz Farm Specialist.