Introduction
In various industries, especially factories, workshops and production centers, the industrial propeller fan plays an essential role in the ventilation, cooling and air movement system. This equipment may become unbalanced due to continuous operation and exposure to dust, humidity or temperature changes. This imbalance can cause vibration, reduced efficiency, increased energy consumption, and even complete failure of the fan.
In this article, we will review the complete balance of all types of industrial propeller fans in Shiraz and introduce the specialized services of Faraz Shiraz Fan.
Why is industrial propeller fan balance important?
Fan balance means the uniform distribution of mass around the axis of rotation of the fan, so that the centrifugal force does not cause vibration and damage. If a fan is not balanced, the following problems will arise:
- Decreasing the lifespan of bearings and motor shaft
- Creating vibration and noise
- Decrease in ventilation capacity
- Increasing power consumption
- Probability of broken blades or damage to the body
Types of unbalance in industrial fans
1. Static balance
In the static balance, the mass distribution is checked in the stationary state. If the mass is not evenly distributed, the fan tends to stop at one point even during slow rotation.
2. Dynamic balance
In dynamic balance, real working conditions are simulated. This method is necessary for large or high speed fans. In the balance of all types of industrial propeller fans in Shiraz, the dynamic method has the most accuracy and durability and is performed by Faraz Shiraz Fan.
Balancing stages of industrial propeller fans
Initial inspection
First, the appearance of the fan, blades, bearings and shaft are checked to identify the damaged parts.
Installation on the balance device
The fan or propeller is installed and fixed on a special balance machine to perform the imbalance test.
Measurement of vibration
Using precise sensors, vibration and unbalance point are measured.
Add or subtract mass
By adding counterweights or shaving extra parts, the mass is evenly distributed in the rotating environment.
Final test
After the correction, the measurement is done again to ensure the complete elimination of the vibration.
Applications of balance services in Shiraz
Fan balance is not only specific to one type of equipment. Faraz Shiraz Fan offers balance services for the following:
- Industrial centrifugal fans
- Large axial propellers
- Industrial blowers and ventilators
- High power blowers
- Shed and factory ventilation systems
Benefits of Fan Balance by Faraz Shiraz Fan
1. Use of modern equipment
This collection uses the most modern dynamic balance devices that are very accurate.
2. Experienced expert team
Faraz Shiraz Fan technicians have years of experience in repairing, installing and balancing all kinds of industrial propeller fans in Shiraz.
3. Cost savings
With a proper balance, the life of parts is increased and the need for expensive repairs is reduced.
4. High speed and accuracy
Performing services in the shortest possible time with perfect accuracy.
Tips for increasing the life of an industrial fan
To avoid premature imbalance, observe the following:
- Correct installation and commissioning according to the manufacturer's instructions
- Regular greasing of bearings
- Periodic cleaning of vanes
- Timely inspection and replacement Shock absorbers
Faraz Shiraz Fan's special services
- Complete repair and restoration of propellers
- Replacement of bearings and shafts
- Periodic vibration measurement and condition monitoring
- Services at the customer's place or workshop Equipped
- Provide a written technical report after the service
conclusion
The balance of all types of industrial propeller fans in Shiraz not only increases productivity and reduces costs, but also ensures the safety and longevity of the equipment.