Introduction to Mehran's metal cans and its benefits
One of the benefits of metal cans for Mehran is the following:
Causes of metal cans vulnerability and decreased life
Although Mehran's metal cans are made of the best materials, environmental factors and improper storage can greatly reduce the life of these products. In this section, we examine some of the main factors that reduce the life of the metal cans, so that by recognizing them, we can maintain the quality of the cans for a long time by adhering to the principles of maintaining and extending the life of metal cans for Mehran.
Moisture and Water Contact: One of the main enemies of metal cans is moisture and water dripping on the surface, causing rust and gradual caries. chemicals and acidic: long -term contact of the cans with acidic or corrosive chemicals can cause corrosion of the coating and negative effect on the body structure of the can. Temperature and thermal fluctuations: severe temperature changes around metal cans damage the coating layer and reduce the life of the can. Mechanical impact and pressure: impact and contact metal cans with hard objects or falling, weakening the coating and structure and providing moisture penetration.
Principles of Metal Metal Metal Production Products Mehran Production
Now that we have known the harmful factors, we are introducing the principles of maintaining and extending the life of metal cans for Mehran. Implementation of these simple principles will make your metal can be used for years with the same initial quality:
1. Maintenance
The most important principle in the principles of maintaining and extending the life of Mehran metal cans is to keep the cans away from the humid environment and water penetration. Metal cans should be stored in the shelf or warehouse with a good, dry air flow. Drinking water or constant contact with the wall is one of the main causes of metal cans rusting.
2. Cleaning the can of the can with dry and soft cloth
The surface of the metal cans can gradually take dust or fat. For cleaning, simply use a soft, dry napkin so that it does not damage the coating layer. Avoid the detergents or scotchs so that the cans of the cans do not disappear.
1. Prevention of contact with acidic materials
Another principle of maintaining and extending the life of Mehran metal cans is to prevent direct contact of metal cans with acidic materials or corrosive detergents. Even sour or acidic foods in the long run can cause rust or corrosion. So if you keep acid, use cans with a special protective layer of Mehran factory.
1. Prevent impact and physical pressure
Metal cans are very resistant to Mehran, but you should not put them from height or put them under heavy pressure. Physical damage will cause cracks or small bumps that open the way to air and moisture.
1. Layout when storing cans
In the warehouse of metal cans of Mehran, be sure to put the cans in a regular and vertical way and avoid direct contact with the wall or wet ground. It is best to use a special shelf or palette and preferably coated.
1. Periodic examination of metal cans
Another principle of maintaining and extending the life of Mehran metal cans is a regular review of the can and edges of the cans. If the alarm or surface injury is observed, quickly repair or replace the cans so that the problem does not spread.
1. Avoid direct sunlight
Excessive heat and continuous sunlight damage the cover or color of the metal cans. Therefore, the best place for storing metal cans for Mehran is a cool and away from direct sunlight.
1. Use special cans for special conditions
If you want to use metal cans in industrial environments or humid places, it is best to use Mehran metal cans with stainless steel layers and reinforced coating for export areas or high humidity areas.
Results of maintaining the principles of maintenance and extension of metal cans for Mehran production
Many Customers of Mehran Cans have reported that only the use of these simple principles, the useful life of Mehran's metal cans has been twice as high than similar products in the market. Also, the appearance and health of the packaged materials have always been maintained in the long run.
Free Metal Can's Technical Services and Consulting Services in Mehran Cans
Mehran cans are always with customers and provide free technical advice on the principles of maintaining and extending the life of Mehran metal cans to increase satisfaction and maintenance costs. Simply call the workshop to guide the Mehran Support Team for the choice of the model as well as how to properly maintain the metal cans.
Why is Mehran's metal cans more than competitors?
Conclusion
With the simple but practical principles mentioned in this article, you can be sure that the principles of maintaining and extending the life of Mehran metal cans will have the best quality and durability for you. Therefore, by choosing and properly taking care of Mehran cans, your products will always remain fresh, healthy, and safe. For specialized advice and purchase of export and durable metal cans, contact Mehran cans today.