In the modern age and the development of electrical infrastructure, the protection of electrical and industrial equipment from excess voltage damage has become a serious necessity. One of the main ways to protect electrical equipment is to use Sergers. But what is Serge Easter and what is the use of electrical systems? In this article we are accompanying you to thoroughly examine this issue and explain the importance of using Sergers. Also, Raad Gostar Nasr (https://radgostarnasr.ir/) will be introduced as one of the most prestigious designers and manufacturers of electrical equipment and whatever is associated with Serge Arster.
What is Sarj Arster?
Surge Arrester, or a protective device against excessive voltage wave, is a equipment used to protect systems and electrical systems against transient and instantaneous voltages. These voltages are usually caused by lightning, switching, electric error or sudden joints and may cause irreparable damage to the equipment. By deflecting, absorbing or discharging excess energy, the heads of the arms cause additional voltage control and the transfer of risky energy to the ground. This vital piece prevents the determination of sensitive equipment.
Types of Armster
The rosters are divided into different types based on the working voltage, construction technology and installation, the most important of which are:
1. Poor pressure arreshter (LV Surge Arrester)
This type of headerrter is used to protect home and industrial electronic equipment (such as computers, powerboards, etc.). It is mainly used in urban distribution boards and residential areas.
1. Moderate pressure Aruster and High Pressure
These models are used to protect transmission lines, power stations, large transformers and distribution networks. Moderate and strong pressure Aruster can transmit very high voltages to the ground.
1. Metal Oxide Surge Arrester)
is the newest type of arster and has been widely used due to excellent performance, long life and the ability to withstand severe currents. Raad Gostar Nasr Company manufactures and offers a variety of metal oxide oxide in accordance with world standards.
1. Gas Discharge Tube (GAS DISCHARGE)
are used for lower voltages and more limited uses such as delicate electronic circuits.
The main components of Sergers Easter
Each Aruster's head consists of several key parts, each with a particular role in the protective performance. The most important of these components are: Resistance Non -Element (Varistor or MOV): The core of the core of the araster that responds to the excess voltage. Electrodes: to connect the head and ground. Insulation body: for isolation and physical protection. Thermal Cutting System: is intended in advanced models to prevent possible accidents.
Application of Sergers in Power Systems
Sergers has a special place in all industrial and building electrical systems, the most important of which are:
1. Protection of Industrial Equipment
In industrial environments such as factories, datacenters, power plants and refineries, the system cuts for a few seconds can cause severe damage. Installation of the Arster Sergeant will make the equipment more safety and reduce maintenance costs.
2. Protection of Transfer and Distribution Networks
In power transmission lines where lightning or excessive voltage is likely to collide, the use of serpentry may prevent the spread of this malicious energy into downstream equipment.
3. Safety of Home Equipment and Offices
In residential buildings, companies, banks and government departments, Serge Arster enhances the level of environmental safety by preventing damage to electrical appliances.
4. Protection of Power Panels and Control Systems
Panel as the heart of the building distribution system must be protected safely. Serge Arster is installed at the entrance of the powerboard and directs the extensions to the ground.
5. Protection of telecommunications and data
Sergers in data and telecommunication lines prevent noise and damage caused by voltage heads.
Benefits of using Sergers in Power Infrastructure
Installation and use of the head of the roster have many benefits, including: Extension of the life of electrical and electronic equipment ▪️ Reduce maintenance costs ▪️ Prevention of sudden shutdowns of equipment ▪️ Reduce spark and fire risk ▪️ Staff safety and users safety
Summary; Why is it necessary for any electric set?
As you can see, Sergers as one of the key protective equipment plays a key role in the health of the power system. Disregarding the use of Sergers can cause heavy damage to the power grid and equipment. If you care about the price, quality and after -sales service and intend to buy a standard Arster, with the original guarantee, be sure to visit the Nasr site and contact the consultants in this collection.
