Why is it so important to recognize lemon coal for Jahrom?

Impact on Health: Fake or low -quality charcoal, due to incomplete baking or the use of inferior wood (such as industrial wood impregnated with chemicals or lightweight and unnecessary wood), when burn toxic gases such as carbon monoxide. These gases are the main cause of headaches, dizziness and nausea after the use of hookah.
Impact on Taste: The main purpose of using high quality charcoal is to cause heat without affecting the taste of tobacco or barbecue. Fake charcoal often have unpleasant odors and smoke that destroys the original taste.
The cost of cost: may seem cheaper at first glance, but this is a misconception. Fake coal burns much faster and turns into ashes due to low density and bad cooking. This means you have to replace charcoal for an hour, which will ultimately cost you much more than buying a lemon coal for Jahrom .

Step by Step to Detect Lemon Coal Jahrom: Key Tips

Step One: Appearance (before turning on)

1. Glossy

Lemon coal Jahrom Due to the complete baking in industrial furnaces and the removal of all the juice and extras of wood, it has a completely black, glossy and glossy color (such as glass or black metal). If the charcoal is brown, gray or has colored spots, it is a sign of incomplete baking or inappropriate wood. Traditional Coal Due to the precise baking process, it looks completely black and shiny.

2. Absence of deep cracks

Lemon wood due to its high density, after becoming charcoal, has a unified structure without deep cracks. The presence of too much cracks on the coal surface indicates the use of lighter wood (such as poplar or willow) or rapid and non -dry drying. These cracks cause the charcoal to be crushed and finished quickly.

1. High weight and density

Take a piece of lemon coal Jahrom . It should look heavy and dense compared to its size. If charcoal was light and scrub, it is definitely not made from lemon wood. This is due to the high density of citrus wood, which is also the secret of its long fuel.

Step Two: Sound Test (a Professional Trick)

This is one of the best ways to Detect Lemon Coal Jahrom from the counterfeit sample .

Stir the two pieces of charcoal gently. Original lemon charcoal Due to its high density and full carbonization process, it produces a sound similar to two pieces of ceramic or metal ("rusty" and transparent sound). But fake or raw charcoal gives a strangle, dumb and similar to two ordinary pieces of wood. This test alone can disclose many low -quality charcoal. Traditional Charity Products All this rusty and metal sound.

Step Three: Break Test

Break a piece of charcoal. Broken cross -sectional area in Lemon coal Jahrom must be completely black, shiny and uniform. If you see brown veins or raw wood in a fracture section, this is a definite sign of incomplete baking (coal raw). Such charcoal produces a lot of smoke when burning and will smell bad.

Step Four: Final Test; Burning test

The most important test is the performance of charcoal during burning.

1. Speed

Lemon coal Jahrom Principle Due to its high density, it is lightly illuminated than light charcoal. This is a good sign! The charcoal, which is very fast and like a fire, is empty and unnecessary. The original charcoal should be slowly and uniformly from the surface to the depths.

2. Absence

After complete frying, original lemon coal should not produce any smoked. Smoke is a sign of moisture and unbroken material in charcoal. Also, smell it. There should be no smell of smell, chemical or smell of burnt wood. Good charcoal only produces heat, not smell! This is one of the most important qualitative commitments in traditional coal .

1. The absence of sparks

Sparking charcoal when burning is very annoying and even dangerous. This phenomenon usually occurs due to moisture, impurities or incorrect baking. A Complete Guide to Detecting Lemon Coal Jahrom should emphasize that high quality charcoal does not spark.

1. The duration of uniform fuel and heat

This is where the actual quality is determined. Lemon Coal Jahrom Principle should burn at least 5 minutes with constant and useful heat. Fake charcoal drops severe heat after 1 to 2 minutes and quickly become ashes.

1. The color and amount of ashes

After the complete burning, pay attention to the residual ashes. Ashes original lemon coal should be completely white and very low. This is a sign of complete burning of organic matter. If the ashes were black, heavy or bulky, it indicates poor quality and extensive impurities in charcoal.

Why does Lemon Charity successfully pass all the tests?

Traditional Coal Set Relying on technical knowledge, many years of experience and commitment to quality, designed a process whose final product shows all the features of a genuine lemon charcoal:

Exclusive Use of Jahrom Lemon Wood: We cooperate directly with reputable gardeners and use only dense and healthy lemon tree wood.
Modern industrial furnaces: precise control of temperature and baking process,
Multi -stage qualitative control: From wood selection to final packaging, our products are constantly checked in color, sound, weight and fuel test to ensure that only the first -class product reaches you.

By buying from Traditional Charcoal Coal , you will no longer need this Full Guide to Detect Lemon Coal Jahrom from the counterfeit sample because we guarantee quality and authenticity for you.

Summary: Choose cleverly, enjoy authenticity

The market is full of deceptive options, but you are now equipped with the knowledge needed to Detecting Lemon Coal of Jahrom from the fake sample . Remember:

Appearance: Black, shiny, heavy and without cracking.
sound: a rusty and similar to ceramic collision.
Burning: smoke, without odor, no spark, high durability. Compact.

These are the birth certificate of a genuine charcoal. If you are looking for a reliable and without concern and want to get guaranteed quality directly from the heart of production (Jahrom), the Traditional Charcoal Collection is your best choice. We invite you not only to buy, but but also to experience authenticity.