The cost of installing a mixer boiler in Isfahan is one of the most important issues that owners of the mixer, concrete contractors, and industrial workshops always pay special attention to when equipping their trucks. The correct and precise installation of the mixer boilers not only determines the quality of the device, but also reduces the quality of the device, but also if it does. Isfahan Mixer as one of the most experienced manufacturers and installers in this field provides complete design, production and installation services of the mixer boiler with the highest industrial standard.

The importance of installing the correct boiler mixer

In fact, much of the optimal performance of the mixer track depends on how the boiler is installed and its angle adjustment on the truck chassis. If the mixer's boiler on the chassis is not properly aligned or the lens angle is not adjusted precisely, the rotational force will not be transmitted and the pressure on the hydraulic system will increase. As a result, the gearbox or pump will be damaged and repair costs will increase. Isfahan Mixer does this by using laser balance equipment and precise concentration system.

Factors affecting the cost of installing a mixer in Isfahan

The cost of installing each boiler mixer varies depending on the technical conditions, the type of truck, the size of the tank and the peripherals. Here are the most important determinants of price.

1. The volume and capacity of the mixer's boiler

boiler capacity usually varies from 6 meters to 12 cubic meters. The higher the volume of the boiler, the more complex the installation process, the welding and the alignment will be.

approximately, each meter increase in the volume of about 1 to 2 million USD on the cost of installation.

2. The type of truck and chassis

Installing a boiler on the Benz truck with Volvo or Photon is different in terms of connection points and torque. Short chassis trucks need to change the angle of installation and usually have a higher installation cost.

3. The hydraulic and gearbox system

If the mixer boiler has a new pump and side engine, it is easier to install, but if you use an old or imported system, it requires reconciliation and wiring.

Isfahan Mixer uses specialized installations to coordinate the pump and gearbox to make the best power transfer.

4. The status of the boiler and connections

If the pot is already used and requires regeneration, replacement of rims or re -welding, the cost of installation increases.

rear lens replacement or repair of internal blades can add between 1 and 2 million USD to the final cost.

5. Color and epoxy service

If the customer requests two -step epoxy anti -corrosion paint, the color cost is estimated at about 1 to 2 million USD.

Isfahan Mixer Installation Process Mixer in Isfahan

1. Careful examination of the truck chassis

First of all, Isfahan experts check the type of chassis, height, axis and weight tolerance to determine the best installation position.

2. Setting the angle of the boiler

Installation angle in order to completely discharge the concrete and prevent the return of materials must be adjusted between 2 and 2 degrees. This setting is done with a digital alignment device.

3. Welding the rims and the connection of the bases

In this section, the main boilers are welded to the main frame of the truck. The use of MIG welding with CO2 gas makes the bond strength and durability.

4.. Connect Power Transfer System

gearbox is connected to the pump and hydraulic motor and the power transmission axle is adjusted. This section is very sensitive because any angle error causes the gearbox to break down.

5. The final test and test

Before delivery, the mixer trace is tested with complete test rotation. Hydraulic pressure, boiler balance and gearbox sound are controlled.

All the above steps can be performed in less than 2 hours in the Central Workshop Isfahan Mixer .

The Benefits of Installing a Mixer Boiler in Isfahan with Isfahan Brand Mixer

Ensure accuracy guarantee with advanced equipment In Isfahan mixer uses an industrial laser balance to co -operate with chassis.

Post -installation support All installation services have warranty. If vibration or leakage is seen in elementary school, the support team will fix it for free.

Experience of more than 5 years of professional activity collaborating with development projects in Isfahan, Yazd, Fars and Khuzestan provinces shows a brilliant record of this collection. Is.

Difference of the new and reconstructed mixer.

In many cases, the owners of the mixer track prefer to rebuild their previous boiler instead of buying a new device. In this case there are differences in installation cost:

New Boiler: The initial adjustment does not require much, the installation is more clean and precise.
Boiler Reconable: Usually the wheel or lens is changed and requires additional adjustment, resulting in increased installation costs.
That requires the full adjustment of the power transmission system.

In the Isfahan Collection Mixer , both installations are done with industrial warranty and standard.

How to reduce the cost of installing a mixer boiler?

To reduce the final cost of installing a mixer in Isfahan, observing a few things:

Prepare the chassis and the power transmission system in advance to make the installation shorter.

If the pot needs color, do it at the same time to remove the cost of transportation and color.

use reputable collections such as Isfahan Mixer to re -purchase the possibility. And coordinate the rim with the installer so that it does not require structural changes.

Sample Installation Schedule in Isfahan Mixer

Truck Delivery and Evaluation: 1 Hours

Chassis & Rings Preparation: 1 Hours

Boiler Installation and Angle Adjustment: 1 Hours

Final Test & Color: 1 Hours

Overall, the full installation of the mixer boiler takes between 1 and 2 business days and will be delivered immediately after testing and confirmation of customer delivery.

Conclusion

The cost of installing a mixer boiler in Isfahan varies depending on the type of boiler, truck, power transmission system and reconstruction status, but if the operation is carried out in a specialized workshop such as Isfahan Mixer , it will be guaranteed in addition to accurate installation, durability and efficiency of the device.