The importance of industrial beams in construction

Introduction of Polad Altin Savis Company

Industrial beam production process in Selmas, West Azerbaijan

1. Preparation of high quality raw materials

Primary materials play an essential role in the quality of beams. The iron, rebar, concrete and wire used in the production line of this factory are supplied from reliable domestic brands to ensure the final strength of the product.

2. Engineering design and calculation

At this stage, according to the type of project and the loads on the roof, the dimensions and specifications of the beam are designed by structural engineers. The use of specialized software minimizes calculation errors.

3. Construction of metal truss

The truss or beam skeleton is produced with precise welding and high quality control, and then it is prepared for concreting. This truss should be able to bear the weight of the roof and concrete in different loading conditions.

4. Concreting and processing

At the Polad Altin Savis factory, concrete is mixed with the exact ratio of cement, sand, sand and water, and after being poured into molds for curing, it is kept under controlled temperature conditions to achieve the required strength.

5. Quality control and final testing

Before sending the products to the construction projects, each beam is subjected to technical tests such as resistance, dimensions and alignment tests. The result of these controls is the production of industrial beams that have fully met the technical standards.

Advantages of using the industrial beam produced by Polad Altin Savis

Using the beams produced by Polad Altin Savis has many advantages for contractors and contractors:

1. High accuracy in dimensions and weight

Industrial beams of this company are produced with automatic machines, as a result human error is minimized and dimensional accuracy is completely guaranteed.

2. Save money and time

Using an industrial beam reduces the execution time and the overall cost of the project, because the need for extensive formatting and manual operations is less.

3. High resistance and long durability

Concrete and steel used in beams have high compressive and tensile strength, which increases the useful life of the structure.

4. The possibility of custom production

Polad Altin Savis Company can produce customized beams with specific length, thickness and specifications based on the engineering plan and project requirements.

All kinds of industrial beams produced in Selmas, West Azerbaijan

Industrial beam production in Selmas, West Azerbaijan according to the market needs includes different types which are introduced below:

1. Concrete beam

This type of beam is made of reinforced concrete and is the most used in residential projects. It is heavy but has a good price.

2. Metal beam (chromite)

Metal beam or chromite is made of steel and is very useful for wide openings. It is lighter than concrete types and requires less piling.

3. Prestressed light beam

It is a new type of beams that are made with pre-tensioned cables. This product is light weight and very strong.

The reason for choosing Polad Altin Savis for the purchase of industrial beams

Choosing the right manufacturer is one of the most important decisions of any construction project. There are many reasons why contractors and engineers choose Polad Altin Savis to buy industrial beams:

• Guaranteed quality according to the national standard
• Competitive price and timely delivery
• Engineering support and providing technical advice
• Sending products all over West Azerbaijan and neighboring cities
• Using reliable brands in supplying raw materials

The role of industrial beams in building strength

The roof of the building is one of the most important components of the structure, which must have sufficient resistance against lateral forces such as earthquakes and wind. The use of industrial beams produced in Selmas, West Azerbaijan by Polad Altin Savis Company provides the assurance of engineers and contractors, because each beam is designed according to accurate calculations and produced with multi-stage quality control.

Industrial beam sales market in Selmas and West Azarbaijan

With the development of urban development in West Azarbaijan province, especially in the cities of Selmas, Urmia, Khoy and Naqdeh, the amount of construction has increased. This growth has multiplied the need for quality industrial beams. With its high production capacity and regular distribution system, Polad Altin Savis Company has been able to take a significant share of the regional market.

In addition to the domestic market of the province, the company's products are also sent to nearby cities such as Tabriz, Mahabad and Maragheh. This issue shows the confidence of employers in the quality of Polad Altin Savis products.

Important points in buying industrial beams

When buying a beam, special attention should be paid to technical and executive matters. Compliance with these points will increase the safety and durability of the structure:

1. Choosing a beam with technical approval and a valid standard
2. Exactly checking the weight and dimensions of the beam
3. Paying attention to the type of project (residential or industrial)
4. Purchasing from reputable manufacturers such as Polad Altin Savis
5. Using an expert team for installation and implementation

Summary

Industrial beam production in Selmas, West Azerbaijan plays a key role in the construction development of the province. Using technical knowledge, modern equipment, strict quality control and extensive experience in the field of beam production, Polad Altin Savis is known as one of the top producers in the region. The products of this collection, while complying with national standards, guarantee the durability and strength of construction projects.