Nano insulation is considered one of the most innovative achievements of the construction industry, which has replaced traditional methods such as Izogam and Qirguni with its waterproof, heatproof and high durability properties. But an important point that many users ignore is the correct maintenance of nano insulation after implementation.
The importance of maintaining nano insulation after implementation
The correct maintenance of nano insulation is very important, because this type of coating must withstand rain, sunlight, temperature changes and pollution for a long time. Although nano insulation is resistant by itself, some environmental factors can disrupt its performance.
Novin Daya Company recommends that after the complete implementation of the insulation, periodic visits and regular cleaning should be carried out so that the insulation surface maintains its properties and does not suffer from premature wear.
Factors affecting the life of nano insulation
Before we go to the maintenance points, we should know the main factors that reduce the useful life of nano insulation. This awareness will help you avoid weakening the insulation.
Direct sunlight
UV rays over time can weaken polymer and nanoparticle compounds. Although Novin Daya products have UV resistant additives, regular care is needed in areas like Tehran where the sun is strong.
Urban chemical pollution
Infiltration of acidic substances from polluted rains or car smoke can gradually destroy the insulation surface. Periodic washing of external surfaces can prevent this damage.
Impact or abrasion of the insulating surface
On roofs where people travel, the possibility of physical damage to the insulation layer is high. Novin Daya always recommends to use protective coatings such as polymer flooring after implementation.
Improper execution or insufficient thickness
The quality of insulation has a direct role in its useful life. If the proper thickness is not observed, even the best materials lose their effectiveness. For this reason, it is better to perform nano insulation by trained people of Novin Daya.
Nano insulation maintenance steps after implementation
In order to maintain the quality and long-term performance of the insulation, basic maintenance methods must be followed. In this section, we examine the complete steps of nano insulation care.
First stage: initial review after implementation
Approximately 48 to 72 hours after applying the insulation, the surface should be inspected to ensure there are no bubbles, peeling or separation. If weak points are observed, it can be corrected by applying a repair layer of the same new Daya product.
Second step: Avoiding unnecessary traffic
It should not be walked on until the insulation layer has completely stabilized and dried. This issue is especially important in the case of nano roof insulation. After drying, protective flooring can be used.
The third step: periodic washing of the surface
Cleaning dust, stains and pollution from the surface of nano insulation preserves its beauty and better performance. For this, use mild water and foam and avoid acidic chemicals.
Novin Daya Company suggests washing the insulation in buildings in Tehran once every six months.
The fourth step: Checking the surface cracks
If for any reason the insulating surface is cracked or scratched, it must be immediately filled with nano repair materials. This work prevents the penetration of moisture and wider destruction of the surface.
Local repair is one of the exclusive services of Novin Daya company, which is provided even for old customers.
Golden tips to increase the useful life of nano insulation
By following a few simple tips, the lifespan of nano insulation can be increased several times. All these points are the result of Novin Daya's many years of experience in various projects.
1. Professional performance
The first and perhaps the most important point to increase the lifespan of nano insulation is to use a professional team in its implementation. Improper implementation can render even the best product ineffective. The technical team of Novin Daya company with modern devices and high experience ensures that all points are uniformly covered.
2. Choose the right thickness
The final thickness of the insulation layer has a great effect on durability. In rainy or humid areas, a thickness of at least 2 mm is recommended, and in industrial environments, even up to 3 mm. Novin Daya's experts will determine this issue according to the project during the pre-implementation visit.
3. Observance of proper temperature during execution
Insulation should not be performed in very hot or very cold weather. The best temperature is between 10 and 30 degrees Celsius. Proper implementation will mean stable performance and long life.
4. Surface protection after implementation
If the insulation surface is exposed to traffic or sharp objects, it must be covered with protective layers such as mosaic or resistant flooring. Otherwise, some parts of the insulation may suffer from surface scratches.
5. No use of strong chemicals
Some users use solvents or strong detergents for cleaning, which dissolve the nanopolymer bonds. For washing, it is enough to use lukewarm water and a soft brush.
6. Annual visit
Post-implementation maintenance services at Novin Daya Company
As a specialized group, Novin Daya company is not limited to the production of nano insulation and also provides maintenance and support services to customers.
Special after-sales service programs
Periodic inspection of insulators
Perform local repair if needed
Product performance warranty extension
Providing training to employers for proper cleaning of surfaces
These services have made many old projects still maintain their insulation quality and Novin Daya company has many loyal customers all over Tehran.
Common mistakes in nano insulation maintenance
Sometimes people with good intentions but unknowingly do things that cause the destruction of insulation in the long run. Recognizing these mistakes can prevent repeated expenses.
Using inappropriate colors on insulation
Some users use ordinary building paints to decorate the insulation surface, which destroys the breathability of the nano layer. Novin Daya Company produces and supplies special nano insulation paints if required.
Ignoring construction meetings
Buildings undergo minor movements over time that may create surface seams. An annual visit will identify this problem before moisture penetrates and prevent major damages.
Clean the surface with abrasive tools
Scratching or abrasion of the surface causes penetration of moisture and pollution to the layers below. Always use soft cleaning tools.
Advantages of proper maintenance of Nano Novin Daya insulation
Principle maintenance of nano insulation has many advantages that both increase the life of the structure and save money.
Last up to 15 years without the need for renovation
30% saving in energy cost
Preserving the beauty and glossiness of the surface
preventing the penetration of mold and fungus
Preserving the color and adhesion of the insulation
All these things are realized only if regular maintenance is carried out according to the recommendations of Novin Daya.
Comparison of maintenance of nano insulation with traditional insulation
In the past, it was common to use isogum and bitumen, but their maintenance was much more difficult and expensive. On the contrary, the maintenance of nano insulation is simpler, faster and without the need for frequent repairs.
For example, Izogam needs to be repaired every two to three years, but Nano Novin Daya insulation, if properly maintained, will remain undamaged for more than ten years.
The effect of weather conditions on the need for maintenance
The weather conditions are different in different areas of Tehran. In the north of the city, where there is more humidity, there is a need for shorter cleaning and inspection, while in the south of the city, due to high dust, washing in shorter intervals is recommended.
Novin Daya company provides its own maintenance instructions for each area in order to achieve maximum durability.
Final summary
Maintaining nano insulation after implementation is one of the vital factors to increase its useful life. Even with advanced technology, any insulation requires regular maintenance for lasting performance. By following the above recommendations and using the support services of Novin Daya Company, you can be sure that the nano insulation will work for years without reducing the quality.
Novin Daya Company, with extensive experience in the production, implementation and maintenance of nano insulation in Tehran, is ready to provide you with the best solutions and protect your structure against moisture and heat.
