The importance of safe maintenance

The basic maintenance of the safe causes:

Prevent errors in the digital lock

To prevent rusting and denting in the body

In case of emergency, the opening of the door should be done safely and without problems

Rahimi store, as a manufacturer and supplier of high-quality home and office safes in Shiraz, always recommends that customers pay attention to periodic service after purchase.

Getting to know the structure of home and office safes

To better understand the maintenance points and increase the lifespan of home and office safes, you need to know its components.

The safe consists of three main parts:

Multi-layer steel body and door - made of cut and heat resistant alloy

Lock and password system - key, digital or biometric

Internal hinges and latch system – for smooth door opening and closing

Each of these parts requires periodic maintenance and review so that the performance of the safe does not decrease over time.

Tips for maintaining and increasing the life of home and office safes

In the following, we discuss the most important points of maintaining and increasing the life of home and office safes, which are recommended by the experts of Rahimi store in Shiraz.

1. Choosing the right place to install the safe

The first step in the lifetime of the safe is choosing the right installation location. Home and office safes should be installed in a place away from moisture, extreme heat and direct sunlight.

If the safe is placed near a heat source or heater, over time the paint, outer coating and even the locking function will be damaged. Also, wet places cause the internal parts to rust.

Rahimi store installation experts can help you choose the best location for the safe at home or at work.

2. Periodic service of digital or mechanical lock

The lock is the most important part of the safe. To keep the lock working, you should check it every six months. If you have a digital lock model, be sure to replace the batteries before the charging is complete.

If you use a mechanical lock, apply a special oil suitable for metal parts on the key and cylinder every few months.

Rahimi store in Shiraz has experienced service workers to check and repair locks.

3. Keeping the outer surface clean

Dust is one of the factors that damage metal surfaces. To clean the safe, use only a soft cloth and a little mild detergent. Never use acidic substances or strong sprays, because they cause surface corrosion.

4. Checking the condition of hinges and doors

Over time, the weight of the door may put pressure on the hinges. Therefore, it is necessary to open and close the door slowly when using the safe. If you feel that the door does not lock properly, be sure to seek help from the experienced repairmen of Rahimi Shiraz store.

5. Periodic password and security reset

To increase security, it is recommended to change the password of your safe once every three to six months. This prevents the password from being leaked in the workplace. In digital models, you can use the ability to define a temporary user so that someone other than the owner has access to the inside only for a limited time.

6. Avoid placing heavy items on the safe

Many people put things on the safe to save space. But continuous pressure causes the door to deviate or damage its structure. It is better to leave the upper level of the safe empty for ventilation and easier access.

7. Prevent moisture penetration

Metal safes may rust if they are kept in damp places such as basements or kitchens. To avoid this problem:

Use the anti-moisture tablet inside the safe

Cover its floor with a dry cotton cloth

Every few months, open the door of the safe and ventilate it

8. Checking the alarm and sensor system (in smart models)

If your safe is equipped with a sensor or an anti-theft alarm system, test its operation at least every three months. Replace the batteries and check the internal wiring so that errors do not occur when necessary.

9. Preventing impact and unprincipled movement

Moving the safe without special tools may cause the body to warp and damage the internal system. Therefore, use the experienced technicians of Rahimi store for moving and installation.

10. Keeping warranty information and after-sales service up to date

In case of any problem, knowing the serial number and warranty period will help speed up the service process. It is recommended to keep the warranty information of your safe in a special notebook or note software.

Professional advice to extend the life of home safes

In the previous section, we reviewed the general tips, but if you want your safe to remain the same as the first day, it is also necessary to observe some specialized tips.

Lubrication of hinges with special materials

Normal industrial oils may cause dust accumulation. Use special lubricants for heavy metals so that the performance of the hinge is optimal at different temperatures.

Periodic test of fire resistance of the safe

The safes produced by Rahimi Shiraz usually have insulation resistant to temperatures above 1000 degrees. Contact technical experts every two years to check the internal insulation and replace it if needed.

Use of surge protectors for digital models

Like other electronic devices, the safe's digital lock is sensitive to electrical fluctuations. Installing a special electrical protector can prevent damage to the password system.

The special services of Rahimi store in Shiraz for maintaining the safe

In addition to selling all kinds of home and office safes, Rahimi store offers special maintenance and repair services. These services include:

Periodical door and safe lock service

Replacement of digital lock battery

Reset password and recover forgotten password

Fire protection system repair or strengthening

Safe transfer of safe in Shiraz

Common mistakes in keeping a safe

Many breakdowns are caused by simple negligence. Below are some common ones:

Using non-standard lubricating sprays

Ignoring the unnatural sound when the door opens

Repeatedly entering the wrong password in the digital lock

Keeping the safe exposed to light, moisture or chemicals

Exercise too much pressure when turning the door handle

By avoiding these things, your safe will work for years without the need for major repairs.

Summary

Considering the significant cost of buying a safe, its proper maintenance is considered as an investment for future security.

Following the tips of maintaining and increasing the life of home and office safes and using the specialized services of Rahimi store in Shiraz will guarantee the longevity of your product.

Rahimi store with a brilliant history in the production, sale and repair of anti-theft safes, home and office, is ready to provide the best services throughout Shiraz.