The role of sealing in the proper functioning of the shower cabin
- Preventing damage to the bathroom walls and floor
- Increasing the useful life of the shower cabin
- Preventing the growth of fungus, mold and unpleasant odor
- Maintaining cleanliness and better hygiene in the bathroom environment
The main components in sealing the shower cabin
1. Shower cabin sealing tape
- Magnetic strip for hinged doors
- Rubber strip under the door for glass bottom
- U-shaped strip for fixed glass sides
2. Silicone sealant or silicone glue
properties of silicone suitable for sealing:
- Resistance to moisture and steam
- Ability to stick to glass, ceramics and metal
- Long durability and no color change
- Anti-fungal and anti-mold properties
In the Eliko Glass Industries collection, European standard silicones are used so that no seams or holes remain.
3. Gaskets and leak-proof fittings
In addition to silicone tape and glue, plastic washers and special fasteners should be used for complete sealing. These washers are usually installed at the junction of hinges or parts where glass is in contact with metal and prevent water from passing through mechanical joints.
Procedures for sealing the shower cabin
In order to achieve a perfect and lasting result, it is vital to carry out the sealing process step by step. The specialists of Eliko Glass Industries in Tehran do this work carefully and according to international standards.
Step 1: Clean the seam
Before starting work, all surfaces, including glass, ceramics, and profiles, must be cleaned of dust, grease, and moisture. Silicone works well only when it is placed on a dry and clean surface.
Step 2: Installing the sealing tape
Strips are installed at certain edges and fixed with the help of manual tools. In frameless models, the precise installation of U-shaped strips makes the edge of the glass vibration-free and without water leakage.
Step 3: Application of silicone glue
Silicone glue should be injected uniformly in the seams. The thickness of silicone should not be less than 3 mm, and after injection, it is smoothed with a special spatula to create a complete connection.
Step 4: drying and final test
Common mistakes in shower cabin sealing
One of the most important reasons that users later encounter leakage problems is incorrect implementation or the use of low-quality materials.
Some common mistakes are:
- Using cheap silicone without anti-fungal properties
- Installing sealing tape unevenly or incompletely
- Ignoring sensitive areas such as under the door or the corners of the floor
- Glue not sticking properly due to remaining moisture or round tiles
To avoid these problems, it is the best decision to entrust the work to professionals like the Eliko Glass executive team.
Types of sealing tapes used in Eliko glass industries
Eliko Glass Industries uses a special strip for each type of shower cabin to maintain optimal performance and beautiful appearance.
Magnetic sealing tape
These strips are used in hinged doors and with their magnetic properties prevent water from passing through the edge of the door.
Tape under the glass (Water Stop)
Fixed glass is installed at the bottom of the door and at the edge, and it blocks the direct way of water going out.
Corner bar or U shape
It is used at the junction of two perpendicular glasses and causes the seam between them to be completely closed.
Frame tape for rail models
In these models, the strips are placed inside the aluminum groove so that in addition to accurate sealing, the smooth movement of the door is not disturbed.
Maintenance and repair of shower cabin sealing
Even the best sealing needs to be reviewed and repaired after a few years. Following some simple tips will increase its lifespan:
- Check the condition of the strips every few months.
- If you see any cracks, gently peel off the old silicone and reapply.
- Do not use strong detergents or alcohol on the PVC strips.
- Be sure to re-seal with silicone compatible with wet environments.
Eliko Glass Industries also provides its customers with inspection and repair services for shower cabin leaks and guarantees all installed products.
Why Elico is the best choice for sealing shower cabins in Tehran
Choosing a professional installer plays an essential role in the success of sealing.
Eliko Glass Industries relies on long experience in the production and implementation of glass shower cabins, uses the latest tools, European standard silicones and anti-rust and anti-fungal tapes.
Elico features include:
- Use of first-class tempered glass and waterproof profiles
- Execution of silicone adhesive with accurate tools and without human error
- Immediate delivery of projects without causing dirt or needing destruction
- Providing a long-term warranty for sealing
- Support after installation and quick repair in case of any leakage
Advantages of basic sealing compared to traditional methods
Shower cabins that are basically sealed have many advantages over old installations with plastic curtains or manual mortars:
- Less consumption of water and energy
- More cleanliness and no splashing water to other places
- Preventing tiles from getting stained
- Increasing the value of the property and the modern look of the bathroom
In fact, sealing the shower cabin has become an essential standard in modern interior design, and Alico Glass is the leader in its precise implementation in Tehran.
Final summary
Water leakage from the shower cabin is one of the problems that can only be prevented by proper and professional sealing.
Using high-quality sealing tapes, high-quality silicone glue, and careful installation by a professional team will ensure that your shower cabin will work for years without the slightest leak.
Eliko Glass Industries Group, with extensive experience in implementing glass shower cabin projects in Tehran, is the best option for standard and durable sealing.
If you are looking for a clean, beautiful and leak-free bathroom, just contact Alico Glass and its experts will guarantee the accurate and perfect sealing of your shower cabin.
