The advantages of implementing the mineral polymer facade of the building in Shiraz
1. High resistance to climatic conditions
Shiraz has hot and dry summers and mild winters. Inorganic polymer material has a very favorable performance against thermal expansion and contraction and does not suffer from surface failure.
2. Beauty and diversity in design
In implementing the mineral polymer facade of the building in Shiraz, you can use a wide range of designs and natural colors. This type of facade has a similar appearance to natural stone, but it weighs much less than real stone.
3. Long lasting and no need for frequent repairs
One of the most important advantages of mineral polymer facades is their high durability. After implementation, the surface of the facade becomes integrated and seamless, and erosive factors such as pollution or UV rays do not affect its appearance much.
4. Reduced structural weight and high safety
In Shiraz construction projects, reducing the overall weight of the facade is very important. Mineral polymer material is lighter than stone or ceramic and increases safety against earthquakes.
5. economic savings in the long run
Although the initial cost of implementing a mineral polymer facade may be slightly higher than conventional materials, it is much more economical in the long run due to its high durability and elimination of repair costs.
Steps of implementing the mineral polymer facade of the building in Shiraz
First step: surface preparation
Before applying any polymer coating, the surface must be completely smooth, clean and dry. If the foundation is plaster or cement, it is necessary to strengthen it with a special polymer primer.
Second step: material composition
In the implementation of the mineral polymer facade of the building in Shiraz, the exact fit between the resin, minerals and additives is very important. Each project has its own composition depending on the weather conditions and the type of structure.
The third step: spraying or applying in layers
After the preparation of the composition, the materials are applied to the desired surface as a high pressure spray or trowel. Uniform and seamless execution is the key to the success of this step.
The fourth stage: final payment and consolidation
At the end, the work surface is polished with a special tool to create a homogeneous and beautiful texture. Sometimes, nano coatings are used to increase the final resistance.
Comparison of mineral polymer facade with other facades in Shiraz
Compared to stone, ceramic or cement facades, mineral polymer facade has significant advantages. Stone facades have high weight and high implementation cost, while ceramic facades require glue and expensive connections. But in implementation of mineral polymer facade in Shiraz, in addition to low weight and quick installation, there is excellent adhesion to the work and high resistance to impact and rain.
Also, compared to facade paint, which has a short lifespan, mineral polymer facade is several times more durable and will not need to be renewed after years.
Different applications of mineral polymer facade in Shiraz
- Modern residential and villa buildings
- Schools and educational spaces
- Commercial and office complexes
- Facade renovation and improvement projects
- Buildings located in humid or sunny areas
Implementation and maintenance tips
- Professional and trained operators should be used in the implementation of the mineral polymer facade of the building in Shiraz.
- The temperature of the environment for the facade implementation should not be less than 10 degrees or more than 35 degrees Celsius.
- After implementation, the surface should be protected from rain and pollution for at least 48 hours.
- It does not require special maintenance, but gentle washing with water and non-alkaline detergents is enough once a year. is.
Why is Shiraz a suitable substrate for mineral polymer facade?
The semi-arid climate of Shiraz has made facades that are resistant to sunlight and temperature changes to be the most popular. In addition, the rapid development of construction in new urban areas such as Sadra and Ma'ali Abad has caused contractors to look for a material that has beauty, long life and reasonable cost.
Therefore, implementation of mineral polymer facade in Shiraz is not only economically and technically justified, but it is also recognized as a leading option in terms of urban landscape modernization.
Influence on the design of modern Shiraz architecture
In addition to exterior use, mineral polymer facade is also suitable for interior spaces such as lobby walls, stairways, or walls of commercial towers and increases the feeling of luxury in the space.
conclusion
According to the investigations, it can be said that implementation of mineral polymer facade in Shiraz is one of the most economical and durable methods of facade construction in this region. Compatibility with the climate, beautiful appearance, high resistance, quick installation and low weight are the most important features of this material.
Today, many luxury and modern construction projects in Shiraz use this type of facade to give the building a special, resistant and economical appearance. By choosing ceramic or natural stone, a lot of cost and weight is imposed on the building, while the use of inorganic polymer compounds provides all these advantages together.
Execution of mineral polymer facade in Shiraz is a forward-looking answer to the needs of the construction industry of this city; A combination of modern technology, natural beauty and unique durability that can create a new perspective in urban architecture.
