What is sandblasting and why is it necessary for metal skeleton?

The importance of geographical location and the need for metal skeleton sandblasting in Qazvin

• Sandblasting of industrial sheds and warehouses
• Sandblasting of fuel and water storage tanks
• Sandblasting of metal bridges and truss structures
• Sandblasting of industrial machine parts

Steps of metal skeleton sandblasting by Asadi brothers

1. Initial inspection and workshop equipment

2. Selection of abrasive materials (M abrasive)

3. Blasting operation

4. Cleaning and ventilation

5. Applying paint (primer)

Quality standards in metal skeleton sandblasting in Qazvin

• Standard Sa 1: Surface cleaning and removal of mud and loose rust.
• Standard Sa 2: Industrial cleaning where most of the pollution is removed.
• Standard Sa 2.5: Very detailed cleaning in which the metal surface becomes completely gray and 95% of pollution and stains are removed. This standard is the most common request in metal skeleton sandblasting in Qazvin.
• Standard Sa 3: Cleaning up to the level of white metal that does not leave any streaks and spots and is used for sensitive nuclear or marine industries.

Advantages of choosing Asadi Brothers sandblasting in Qazvin

1. Native experience: Full knowledge of the industrial towns of Qazvin province and implementation challenges in these areas.
2. Modern equipment: Use of standard sandblasting boilers and strong compressors that increase the speed of sandblasting metal skeleton in Qazvin.
3. Professional team: Our operators are not just simple workers, but experts who have been for years. They operate in the field of metal skeleton sandblasting in Qazvin. Competitive price: providing the best price according to the quality of work. We believe that high quality should not always be expensive.
4. Compliance with HSE principles: Sandblasting is a risky job. Using standard helmets, breathing system and safe scaffolding is our priority.

Factors affecting the price of metal skeleton sandblasting in Qazvin

• Measurement of the work surface: Naturally, the larger the surface, the unit price may be slightly adjusted, but the volume of work will be higher.
• Profile type: Metal frame sandblasting in Qazvin For simple beams, it is cheaper than complex truss structures or narrow pipes, because sand throwing is more in mesh structures.
• Structure height: Work At the height, it requires scaffolding, lifting and safety measures, which increases the price of metal skeleton sandblasting in Qazvin.
• Type of material (abrasive): Use of sandpaper or silica and their quality has an effect on the cost.
• Project location: Distance or proximity to Qazvin city center and logistics costs.
• Degree of cleanliness: Reaching Sa 2.5 grade takes more time and materials than Sa 2.

To get the most accurate price of sandblast metal skeleton in Qazvin, we suggest you contact the contact numbers of Esdi Brothers Sandblast so that our experts can visit the project for free and estimate the cost.

The role of sandblasting in industrial painting

You might think that a quality paint alone can prevent rust. But our experience in implementing hundreds of metal skeleton sandblasting projects in Qazvin has shown that even the most expensive colors do not last on a polished or rusty surface.

Sandblasting process by removing the oxidized layer (Mill Scale) that is naturally present on the rolled steel, provides the conditions for the chemical and mechanical bonding of the paint. In fact, metal skeleton sandblasting in Qazvin is an absolute prerequisite for the implementation of epoxy, zing-rich, polyurethane and fireproof coating systems.

Many sheds in Caspian or Lea industrial town have suffered severe corrosion due to humidity and chemical gases. In the reconstruction of these sheds, sandblasting of the metal frame in Qazvin is the first step. The Esdi brothers sandblasting team prepares the surface for repainting using dry sandblasting methods and, if necessary, wet blasting (sandblasting with water to reduce dust).

Safety and environmental tips

In the process of sandblasting metal skeleton in Qazvin, the production of dust is inevitable. Asadi brothers team is committed to complying with environmental principles. We try to prevent dust from spreading to the surrounding environment as much as possible by enclosing the workshop environment. Also, it is our priority to use standard sands that do not contain free silica (carcinogenic agent). The scrap metal used in metal skeleton sandblasting projects in Qazvin usually has the least environmental damage and cannot be recycled, but it has less health risks.

Esdi Brothers sandblasting operators are equipped with special caps that pump purified air directly into the cap to prevent dust inhalation. The safety of personnel and the working environment in metal skeleton sandblasting projects in Qazvin is our red line.

The difference between on-site sandblasting and factory sandblasting

Sometimes the metal parts are sandblasted and painted in the factory before installation, and sometimes the operation is done after the installation of the skeleton. Metal skeleton sandblasting in Qazvin by Asadi Brothers can be implemented in both modes.

If the parts are on the ground, the work speed is higher and the cost is lower. But if the skeleton is installed, it is necessary to work at height. The important thing in metal skeleton sandblasting in Qazvin for installed structures is to carefully cover sensitive equipment, electric cables, and glasses so that they are not damaged by the impact of sand. Asadi brothers contracting group is meticulous in covering and protecting the client's property during work.

Why is rust removal with traditional methods not enough?

In order to reduce costs, some employers use methods such as manual brushing or grinding instead of sandblasting metal skeleton in Qazvin. These methods may clean the appearance of the work, but they cannot remove the deep rusts inside the pores of the steel. Also, they do not create a suitable surface profile for paint adhesion.

Research has shown that the life of paint on a surface prepared with metal skeleton sandblasting in Qazvin is up to 5 times longer than a surface cleaned with a wire brush. Therefore, the initial cost of sandblasting is actually a long-term investment that will save you from frequent painting.

Final speech and ways of communication

Gazvin's growing industry needs powerful support services. Metal skeleton sandblasting in Qazvin is considered one of the main pillars of preserving the industrial infrastructure of the province. Whether you are building a new shed or renovating your old facility, the quality of surface preparation determines the longevity of your investment.

Esdi Brothers sandblasting contracting group, relying on technical knowledge, modern equipment and committed manpower, is ready to carry out metal skeleton sandblasting projects in Qazvin with the highest quality and the most suitable price. We are confident in our work and our guarantee is the satisfaction of our previous customers throughout the industrial towns of the province.

For free consultation, price inquiry and project visit, contact us now. Don't let rust destroy your capital; Give strength and beauty to your structures with metal skeleton sandblasting in Qazvin by Asadi brothers. We are by your side in all stages from consultation to implementation and final delivery to get the best result from metal skeleton sandblasting in Qazvin. Choosing a compassionate and skilled contractor will ease your mind for years. Esadi Brothers Sandblasting is a familiar and reliable name in the sandblasting and industrial painting industry of Qazvin Province.