The importance of knowing the price of pipe opening in Tehran before ordering

Factors affecting the price of pipe opening in Tehran

Surface clogging: They are usually fixed by simple and short sprinkling and have the lowest cost.
Hard clogging (cement or sediment): If the inside of the pipe is heavily sedimented or the building materials are hardened, stronger devices, diamond springs and more time are needed. Naturally, the price of pipe opening in Tehran will be higher for these cases.

Normal springs usually cover up to 5 or 10 meters.
If there is a need for high-length springs (for example, 20 or 30 meters), the depreciation of the device and the labor of the service will increase and the cost will increase. Mobin Gostar Ali Mohammadi facilities are equipped with all kinds of steel springs in different sizes.

24/7 service: Tube blockage knows no time. We are ready to serve at all hours of the day and even on holidays.
Tehran nationwide coverage: It doesn't matter if you are in the north, south, east or west of Tehran. Our forces are at the closest distance to you to reach the place quickly. This will reduce the cost of transportation and adjust the price of pipe opening in Tehran for the customer.
Full respect for hygiene: Pipe opening seems like a dirty job, but our personnel are committed to providing services with the least dirty work and respecting the hygiene of the environment (using gloves and washing the place after work).
Modern equipment: Using advanced generator devices that controlled so as not to damage the plumbing of the building.
Service Guarantee: We guarantee that the clog will be completely removed. If the same problem is repeated in a short period of time without entering a new object, we are responsible for it.

Springing: It is the most common and usually the least expensive method. By rotating and vibrating, the spring crushes the obstacles and opens the way for water. It also has the property of removing the layer and cleans the pipe wall.
Air compressor: It is a device that stores air with very high pressure in the tank and releases it in the pipe at once. This method is great for clogs caused by soft sand or when the pipe is full of water. The price of this method is usually a little higher than simple springing, but in certain circumstances it is the only solution. For a detailed inquiry price of pipe opening in Tehran with any of these methods, contact our experts.

Using a net: Be sure to use special nets for the sink and bathroom shoe rack so that hair and food waste do not enter the pipe.
Not spilling oil: Solid or liquid oil hardens and is sticky after cooling in the pipe. Put the oils in the trash, not in the sink.
Boiling water and washing powder: Pour some washing powder and boiling water in the pipes once in a while to wash the surface grease.
Preventing things from falling: Be careful of falling soap, shampoo lids or phones in Iranian and Iranian toilets.