Why do sewer pipes get clogged?
Accumulation of fat and oil in kitchen pipes
Entry of foreign bodies and debris
Sedimentation and scaling of old pipes
What is pipe springing and why is it the best method?
High penetration power in hard clogs
Flexibility and access to pipe depth
No damage to the piping system
Types of springs used in removing clogging
- Diamond surfer: To crush very hard objects such as stone, brick or cement that have entered the pipe by mistake.
- Acid surfer: To remove chemical deposits and hardened fats that are resistant to normal acids.
- Knife surfer: To cut and shred fabric fibers, hair and tree roots that are stuck in the pipe
- Spear Surfener: to penetrate dense soil and sand jams.
The difference between opening a pipe with chemical solutions and springing
- Risk of corrosion of pipes: Repeated use of acid causes the loss of the glue of Plica pipe connections or corrosion of cast iron pipes, which results in water leakage and heavy repair costs.
- Danger to health: Gases emitted from acids are very harmful to the lungs and skin. Cramps return after a short time.
Special services of Mobin Gostar Ali Mohammadi facilities in Tehran
Nationwide coverage of all areas of Tehran
24/7 without a break
Written guarantee of service and fair price
Full compliance with health principles
The steps of springing by our experts
- Diagnosis of the problem: The service worker arrives at the site and identifies the type and location of the clogging by careful examination.
- Choosing the right tool: Based on the severity of the clogging and the type of pipe, the appropriate device and springer are selected.
- Spring operation: The spring is guided into the pipe and opens the clogging by rotating and impacting. At this stage, the skill of the service worker in controlling the device is very important.
- Testing the pipe's openness: After removing the blockage, by pouring a large amount of water, the complete openness of the path is tested.
Important tips to prevent clogging of pipes
- Using nets: Install nets on floors and sinks to prevent debris and hair from entering.
- Not draining oil: Never pour cooking oils down the sink. Collect them in a separate container and throw them in the trash.
- Periodical washing: Every so often, pour some boiling water and washing powder in the pipes to wash the surface grease.
- Preventing the entry of construction materials: During the renovation of the house, be sure to cover the sewer pipes. The entry of cement and plaster is the main cause of hard clogging, which requires springing and unclogging of hard pipes in Tehran.
Removing clogging of French and Iranian toilets
Why is opening a pipe with a drill dangerous?
How much is the cost of sprinkling and unclogging hard pipes in Tehran?
- Type of clog: Simple clogs can be opened with ordinary springs and are less expensive, but cement or tree root clogs require special tools and more time.
- Spring size: If the clog is deep in the pipe and far from the inlet, longer springs are needed, which affects the price.
- Number of pipes: Sometimes clogs Occurs in the main pipe of the building (riser) that involves several units.
- Requires carving: In very rare cases when the pipe is completely blocked or broken, repairs and carving are required.
