Nowadays, due to the expansion of the population in the big cities and the urgent need of medical centers, hospitals and cemeteries for standard equipment for keeping the deceased, the construction of a mortuary in Tehran has become one of the vital and important issues. Maintaining human dignity after death and preventing coffin corruption requires advanced and completely hygienic cooling systems. In the meantime, Iran Mumtaz Company, as one of the pioneers of the country's refrigeration industry, has designed and built a mortuary in Tehran with the highest possible quality, using the latest knowledge and expert engineers. This article deals with the detailed examination of all the technical, price and quality aspects of these devices.

The importance of building a mortuary in Tehran and health standards

Tehran, as the capital and the most populous city of Iran, has the largest number of hospitals, surgical clinics and forensic medicine centers. This volume of medical centers requires strong infrastructures for corpse management. Construction of a mortuary in Tehran must be done exactly according to the standards of the Ministry of Health and the General Directorate of Medical Equipment.

Corpses are isolated chambers with the ability to produce cold, which lowers the temperature of the corpse and prevents the activity of bacteria and microorganisms that cause the decomposition of body tissue. Iran Mumtaz Company in the process of building a mortuary in Tehran uses materials that can be washed and disinfected one hundred percent. The use of non-magnetic steels in the body and drawers prevents rust and guarantees the longevity of the device in Tehran's climate.

Various mortuary models produced in Iran are excellent

When it comes to construction of a mortuary in Tehran, product variety is very important. The needs of a small rural clinic are completely different from a thousand-bed hospital in the center of Tehran. Iran Mumtaz Company offers a wide range of products:

Single cabin mortuary

This model is suitable for small centers, rural mosques or limited clinics. In construction of mortuary in Tehran for single cab models, usually 3.4 horsepower engines are used, which have low energy consumption and occupy little space.

Two-cabin mortuary

The most demanded model in the market is the double cabin model. In order to manage their space, most of the private clinics and hospitals register the order of construction of mortuary in Tehran in the form of two cabins (two drawers on top of each other). This model has a good balance between price and performance.

multi-cabin and central mortuary

Central systems are needed for large government hospitals, forensic medicine and large cemeteries in Tehran such as Behesht Zahra. Construction of mortuary in Tehran for these centers is done as a set of cabins (3, 4, 6, 8 and even 12 drawers). Iran Mumtaz Company has special expertise in designing central units with powerful three-phase compressors that can manage the temperature of all cabins at the same time.

Technical specifications and body in the construction of mortuary in Tehran

One of the reasons that distinguishes Iran Mumtaz from other competitors is the obsessive accuracy in technical details. In the construction projects of mortuary in Tehran, attention to the body and insulation is the first word.

Body material:

In the construction of mortuary in Tehran, the best material is stainless steel 304 (Stainless Steel 304). This type of steel is completely resistant to moisture, strong detergents and blood. Iran Mumtaz uses thick steel in the construction of internal and external walls as well as stretchers so that it does not deform due to moving heavy bodies. Some manufacturers use galvanized color to reduce costs, which will rot over time, but our suggestion is always pure steel.

Insulation:

In order to reduce the pressure on the engine and keep the cabin cool, proper insulation is necessary. In construction of mortuary in Tehran by Iran Mumtaz, injected polyurethane foam with density 40 is used. This foam is injected as a liquid between two walls and after drying, it becomes a hard and insulating layer that prevents energy wastage.

Cooling system and compressor in the construction of mortuary in Tehran

The beating heart of any refrigeration system is its compressor or motor. Considering the weather conditions of Tehran, which is hot in summers, the cooling system must be able to work in harsh conditions. In the process of building a mortuary in Tehran, the right engine is selected based on the volume of the cabin.

Motor brands:

Iran Mumtaz Company uses world-reputable brands such as Tecumseh, Danfoss, Bitzer and Embraco to guarantee quality. For single and double cabin models, hermetic (closed) engines are usually used, and for large central systems, hermetic or scroll compressors are used.

Evaporator and condenser:

The evaporators used have strong fans that circulate the cold evenly throughout the cabin (air circulation). In the construction of the mortuary in Tehran, the use of copper pipes with aluminum fins causes maximum heat exchange. Also, an automatic defrost system is installed so that the operator does not need to turn off the machine to clean the frosts.

The role of standard temperature in the construction of mortuary in Tehran

Generally, morgues are divided into two categories above zero and below zero.

1. Refrigeration above zero (short term): The temperature of these devices is usually set between plus 2 and plus 5 degrees Celsius. This temperature is suitable for keeping the corpse for several days (for example, until burial or transportation). Most of the orders for construction of a mortuary in Tehran are related to this type.

2. Subzero cold room (long term): If the body needs to be kept for weeks or months (for example, for forensic investigations or identification), a subzero cold room with a temperature of minus 20 degrees should be used. Iran Mumtaz Company has the ability to design both systems, and it uses powerful freezing systems in the construction of a mortuary in Tehran for forensic medicine.

Why is Iran Mumtaz the best option for building a mortuary in Tehran?

Choosing a reliable contractor and builder in Tehran can be challenging. There are several reasons that have made Iran Mumtaz Company the first choice of customers:

Experience and expertise: Years of continuous activity in the field of refrigeration equipment production.
Using first-class materials: Not using low-quality Chinese parts and focusing on high-quality European or Iranian parts.
Warranty and after-sales services: All projects of construction of a mortuary in Tehran by this company have a valid engine and body warranty.
Speed of delivery: Due to the well-equipped workshop around Tehran, the speed of making and delivering orders is very high.
Customization: The possibility of making a device with special dimensions suitable for the space of the corridor or hospital cold room.

Key points in the installation and operation after the construction of mortuary in Tehran

After the stages of construction of mortuary in Tehran are completed in the factory, it is time to transport and install. Mortuary machines usually weigh a lot. The flooring of the installation site must be level and washable (with shoe cover). Proper ventilation for the condenser (the outer part of the engine that produces heat) should also be considered.

Technicians of Iran Mumtaz company install and train personnel after delivering the device. Users are taught how to set the digital thermostat, how to clean the cabins, and electrical safety tips. One of the advantages of building a mortuary in Tehran by a local and reliable company is quick access to technicians in case of any possible problems.

Investigating the price of mortuary construction in Tehran

The final price of the product depends on many factors and a fixed price cannot be set for it. But the factors affecting the price of building a mortuary in Tehran are:

1. Number of cabins: Naturally, the price of the 4-cabin model is higher than that of the 2-cabin model.

2. Body material: 304 steel is more expensive than 430 or galvanized steel, but its durability is several times higher.

3. Motor power and brand: German Danfoss or French Tecumseh motors have a higher price than Thai or Chinese motors.

4. Sheet thickness: The use of thicker sheets in the construction of a mortuary in Tehran increases the strength and weight of the device and, as a result, increases the price.

5. Type of stretcher: Wheeled and telescopic stretchers have a more complicated mechanism than simple rail models.

Iran Mumtaz Company tries to offer competitive prices to Tehrani customers while maintaining quality. To inquire about the exact price of building a mortuary in Tehran, the best thing is to contact the company's sales department directly.

Intelligent control and monitoring system

In modern projects construction of a mortuary in Tehran, the use of smart technologies is widespread. Iran Mumtaz equips its devices with digital control panels that display the temperature inside the cabin with an accuracy of 10 degrees. It is also possible to install an alarm system so that in case of high temperature or power failure, the hospital's technical officer will be notified via SMS or siren. This ability is very vital in the construction of a mortuary in Tehran for centers that are highly sensitive.

Health and cleanliness in cold storages in Iran are excellent

One of the main challenges in cold storage is cleaning and removing blood. In the design and construction of the mortuary in Tehran by our technical team, the floor of the cabins is designed with a slope towards the drain. This design allows the interior of the cabin to be washed with high pressure water and disinfectants after each use, and all liquids are removed quickly. The presence of silicone and magnetic seals around the doors also prevents unpleasant odors from escaping to the outside environment. It is the precise details in the construction of the mortuary in Tehran that show the quality of Iran Mumtaz's work.

Transporting and placing the device on site

Many old hospitals in Tehran have narrow corridors or small entrance doors. One of the special services of Mumtaz Iran Company in the process of construction of a mortuary in Tehran is the initial site visit and the design of the device in the form of on-site assembly (if needed). If the device does not pass through the door in one piece, the parts are made separately and assembled and insulated at the final location by the company's engineers. This flexibility is considered a great advantage in building a mortuary in Tehran.

The effect of currency fluctuations on the cost of building a mortuary in Tehran

Considering that an important part of parts such as compressors and steel sheets are imported, exchange rate fluctuations have a direct impact on the cost of building a mortuary in Tehran. However, Iran Mumtaz Company tries to stabilize prices as much as possible by managing the supply chain and stocking spare parts. It is recommended that purchasing managers of hospitals and medical centers do not hesitate to order the construction of a mortuary in Tehran and sign a contract as soon as possible so as not to be subject to possible price increases.

Comparison of fixed and mobile morgue

In addition to fixed models, sometimes portable and wheeled models are needed. In unexpected events or critical situations in Tehran, the need for mobile cold storages increases. Construction of a mortuary in Tehran in container and mobile form is also a specialty of Iran. These models can be connected to city electricity or generator and can be installed anywhere. Industrial locking wheels under the device allow easy movement in hospital corridors.

Polyurethane insulation technology in Iranian products

As mentioned, insulation plays a key role. In construction of mortuary in Tehran, we use high pressure foam injection devices. This will allow the polyurethane foam to penetrate into all the tiny pores and leave no thermal bridges. This technique makes the engine of the device work less and as a result the power consumption is greatly reduced. According to the commercial and industrial electricity tariffs in Tehran, the optimality of energy consumption in the construction of a mortuary in Tehran is an important economic factor for buyers.

Conclusion and how to order

Finally, it should be said that building a mortuary in Tehran is a specialized process that requires knowledge of refrigeration engineering, knowledge of health standards, and high operational experience. Preserving the dignity of the deceased and ensuring the health of the environment are the red lines of this industry. Iran Mumtaz Company with a brilliant resume and the satisfaction of many customers in Tehran and its suburbs, is ready to design and produce the best and highest quality devices according to your budget and needs.

If you are looking for quality, durability and real after-sales service, order the construction of a mortuary in Tehran to us. Iran Mumtaz Company's consulting team is ready to answer your technical questions and provide detailed invoices. Trusting a well-known brand will guarantee your peace of mind for years to come. To start cooperation and place an order for construction of mortuary in Tehran, contact our experts today and experience the difference in quality.