In today's industrial world, polymers and plastics have replaced many traditional materials such as metal and wood. But the raw appearance of plastic is not always attractive to the end consumer. This is where the importance of the coating process becomes apparent. If you are looking to improve the visual quality and physical resistance of your products, finding a specialized center for painting plastic parts in Tehran can be challenging. The city of Tehran, as the industrial hub of the country, hosts large industries from automobile manufacturing to home appliances, and the need for professional painting services is felt there more than anywhere else. Aras Plus Industrial Group, using modern knowledge and advanced equipment, is a pioneer in providing plastic parts painting services in Tehran and has defined new standards in this field.

In this article, we are going to do a detailed, technical and comprehensive review of all aspects of painting polymer parts and explain the reasons for the superiority of Ares Plus Industrial Group in this competitive industry.

Why is it important to paint plastic parts?

Using plastic in the production of industrial parts has many advantages such as light weight, easy malleability and low production cost. But raw plastic often has a matte, uniform and sometimes cheap appearance. The process of painting plastic parts in Tehran, which is done by specialists, is not only for beauty. This work pursues much more important goals.

The first and most important reason is protection. Plastics are vulnerable to the sun's ultraviolet (UV) rays and become discolored and brittle over time. painting services of plastic parts in Tehran by using UV-resistant colors, multiplies the life of the part. In addition, the color coating can increase the chemical resistance of the part against detergents, acids and solvents. Ares Plus Industrial Group, understanding these needs, proposes special formulations for each type of plastic to create the highest level of protection.

The second reason is aesthetics and branding. In the competitive market of Tehran, the appearance of the product comes first. A metallic color coating, piano black (shiny black) or soft touch (velvet touch) can greatly increase the added value of your product. Painting plastic parts in Tehran by a professional team like Aras Plus gives your product an identity.

Technical challenges in plastic coloring

Unlike metals, plastic painting is a very complex and delicate process. The main reason for this complexity is the low "surface energy" of plastics. Many plastics such as polypropylene (PP) and polyethylene (PE) have a slippery surface and paint does not sit well on them. If the process of painting plastic parts in Tehran is done without technical knowledge, the paint will peel off and fall off after a short period of time.

Another challenge is the variety of plastics. ABS, Polycarbonate (PC), Polyamide (PA) and PVC parts each behave differently against paint solvents. A specialized center painting plastic parts in Tehran must have the ability to accurately identify the type of polymer and choose the right primer (lining). Ares Plus Industrial Group is equipped with an advanced laboratory that performs adhesion and compatibility tests on parts before starting mass production to ensure final quality.

Standard procedures for painting plastic parts in Ares Plus Industrial Group

To achieve a perfect coverage, different steps must be taken. In Ares Plus Industrial Group, the process of painting plastic parts in Tehran is carried out according to international automotive standards. These steps are:

1. Degreasing and cleaning

The presence of any grease, mold oil, dust or fingerprints on the part will cause the paint to not stick. In reputable plastic parts painting centers in Tehran, the parts are first washed and dried with industrial detergents and special solvents. Ares Plus uses mechanized washing systems so that no pollution remains on the surface.

2. Surface Activation

As mentioned, plastics have low adhesion. To solve this problem, the fragment level must be activated. This work is usually done through methods such as "Flaming" or "Corona Treatment". These techniques raise the energy of the surface and make it ready to accept color. Aras Plus Industrial Group's expertise in the precise implementation of this step has distinguished them from other competitors in the field of painting plastic parts in Tehran.

3. Primer spraying

Primer is an intermediate layer that is placed between the plastic and the main color. The primer has two functions: creating strong adhesion with the plastic and creating a suitable surface for the final paint. Choosing the type of primer in painting plastic parts in Tehran services is very important and it is different depending on the type of part (for example, car bumper or vacuum cleaner body).

4. Final painting (Top Coat)

At this stage, the main color, which can be matte, glossy, metallic or with special effects, is applied by paint spraying robots or professional operators. The use of isolated paint rooms (Clean Room) in Ares Plus Industrial Group prevents environmental dust from settling on the part and creates a completely polished surface. This level of quality in painting plastic parts in Tehran is rare.

5. Curing

After spraying, the pieces are put into special ovens to dry and harden the paint. The temperature and cooking time should be adjusted so that the plastic piece does not deform (change its shape), but the color reaches its maximum hardness.

Various applications of plastic coloring in different industries

Plastic parts painting services in Tehran cover a wide range of industries. Ares Plus Industrial Group is proud to cooperate with various industries, some of which we mention below:

Automobile and motorcycle industry

Perhaps the biggest customer of painting plastic parts in Tehran is the automobile industry. Bumpers, side mirrors, handles, dashboard and decorative parts inside the cabin all need quality and durable paint. The colors used in this industry must have a high resistance to the impact of gravel, car wash and sunlight. By using two-component polyurethane paints, Ares Plus meets the strict standards of car manufacturers.

Household appliances

From the body of the vacuum cleaner and the panel of the washing machine to the small parts of the tea maker and blender, the appearance of household appliances has a direct impact on their sales. Home appliance manufacturers are looking for hygienic, wear-resistant and beautiful colors for painting plastic parts in Tehran. The heat and scratch-resistant colors provided by Ares Plus are the best option for these products.

Electronics and gadgets industry

Modem frame, laptop body, headphones and other electronic devices need delicate and precise covers. One of the most popular services of painting plastic parts in Tehran in this field is "Soft Touch" coatings, which gives a velvety and soft feel to plastic and prevents it from slipping in the hand. Ares Plus Industrial Group has special expertise in implementing this type of special coatings.

Why is it important to choose a contractor in Tehran?

The city of Tehran is a crowded market for industrial services due to the concentration of factories and production workshops. But why is it so important to find a committed contractor for painting plastic parts in Tehran?

First, the air quality of Tehran and the presence of a lot of dust make it impossible to paint in non-isolated environments. Traditional workshops that do not have a clean room and air filtration systems cannot provide a clean and round output. The presence of a particle of dust on the painted part causes an appearance defect and removes the product from the quality category. Ares Plus Industrial Group has provided a fully controlled environment for painting plastic parts in Tehran by investing in modern ventilation systems and color cascade cabins.

The second is the discussion of time and logistics. For manufacturers based in Tehran and suburbs, sending parts to distant cities for painting is costly and time-consuming. Access to an equipped center for painting plastic parts in Tehran, such as Aras Plus, reduces transportation costs and increases production speed.

New technologies in Ares Plus Industrial Group

What has made Ares Plus Industrial Group the market leader of painting plastic parts in Tehran is the use of modern technologies.

1. Robotic spraying systems:

Using the robot for painting makes the color thickness uniform on all surfaces of the part. Human error in this method is reduced to zero and the work speed increases greatly. For high circulation projects in painting of plastic parts in Tehran, Aras Plus robotic system is the best choice.

2. Eco-friendly colors:

According to strict environmental laws, the use of water-based paints is expanding. By updating its equipment, Ares Plus has made it possible to apply these types of colors, which have less smell and less pollution.

3. Conveyor Oven:

For uniform drying, the pieces move on a conveyor belt and pass through the oven. This system makes all the parts experience the same temperature conditions and the color quality remains constant in all production parts. This stability of quality is the key to success in plastic parts painting projects in Tehran.

Quality control: Aras Plus guarantee

At Ares Plus Industrial Group, the work does not end when the painting is finished. The Quality Control (QC) unit inspects the parts using precision equipment. The tests that are performed are:

Cross-cut test: To measure the adhesion of paint to plastic.
Thickness measurement test: Ensure that the thickness of the paint is within the standard range.
Salt spray test: To check the resistance of the paint against corrosion and humid weather conditions.
Color shade matching test: Compare the final color with the reference sample using the device Spectrophotometer.

The existence of such a strict quality control system is rare among the companies providing painting of plastic parts in Tehran and it shows the commitment of Aras Plus to customer satisfaction.

The cost of painting plastic parts in Tehran

One of the frequently asked questions of producers is how to calculate the price. The cost of painting plastic parts in Tehran depends on several factors:

Type and brand of paint used: Foreign and high-quality colors have a higher price.
Geometric complexity of the part: Parts that have hidden and complex angles, use more paint and take more time. Does it have primer, base coat and clear (three layers) or is it single layer?

Ares Plus Industrial Group will help you find the best balance between quality and cost by providing free consultation. Our goal is to provide the most cost-effective painting services for plastic parts in Tehran without quality loss.

A variety of applicable color effects

Variety is a requirement to attract customers. There is no color restriction in Ares Plus Industrial Group.

Solid (simple) colors: white, black, red, etc. with excellent coverage.
Metallic and shell colors: with crown particles that have a special shine under the light. Very popular in painting plastic parts in Tehran for car parts.
Matte coatings: to create a modern and sporty look.
Wood and carbon design (hydrographic): Although it is a different process, it is offered along with painting services.

The importance of substructure in the coloring of recycled plastics

Today, the use of recycled plastics is widespread. But painting these materials is much more difficult than new materials. The surface of these plastics is more uneven and has impurities. Aras Plus Industrial Group's expertise in plastering and precise underlaying has made it possible for even recycled parts to take on a completely new and luxurious look after painting plastic parts in Tehran. The secret of this success is the use of special putties for plastic and precise sanding.

Final speech and invitation to cooperation

In the end, it should be said that painting plastic parts in Tehran is a process that combines chemistry, mechanical engineering and art. The final quality of your product is the reputation of your brand. Leaving this work to non-specialized workshops can lead to heavy financial losses and product returns.

Ares Plus Industrial Group is ready to be your reliable business partner with years of brilliant experience, modern robotic equipment, isolated color rooms and experienced engineering team. We guarantee quality, speed and durability. If you are a manufacturer of auto parts, home appliances, medical or electronic equipment and you are looking for the best plastic parts painting center in Tehran, contact our experts today.

Give your product a new life and shine in the market with Ares Plus professional painting services. The difference is in the details and we are masters of the details. The doors of Aras Plus collection are open to respected craftsmen to receive technical advice, price inquiries and visit the color line. Let's improve the quality of national production together.