The heavy transportation industry in Iran is the backbone of the country's economy and development. From moving building materials for building towers in big cities to transporting minerals on impassable mountain roads, everyone needs a powerful fleet and durable equipment. In the meantime, the cargo room of the truck, as the main cargo compartment, plays a decisive role in the productivity and safety of the car. If you are a truck owner or active in the field of transportation, you must know that the name of the city of Bukan is connected with the room making industry. But among hundreds of workshops, choosing the best collection is challenging.

Why is Bukan the capital of Iran's room making?

Maybe the first question that arises is why everyone goes to Bukan to order a room? The city of Bukan in West Azarbaijan province has become the unrivaled pole of the truck room industry in the Middle East in recent decades. The concentration of skilled craftsmen, the existence of a large raw material market and fierce competition have made quality the first word in this city. However, in this competitive market, the construction of all kinds of dump cargo rooms at Novin Bukan Chamber Construction is different from others due to the observance of global standards and the use of modern technology. In modern room construction, the tradition of craftsmanship is combined with modern engineering to produce a product that will last for years under the pressure of heavy loads.

The importance of choosing a quality bar room

The truck room is not just a metal compartment; Rather, capital is the driver. A poor quality room can cause premature tire wear, damage to the truck chassis and increase fuel consumption. In addition, constant jack failures and body rot imposes high repair costs. The process of construction of all types of dumping cargo rooms in Novin Bukan Chamber Construction is designed with a deep understanding of these challenges. We understand that your truck should always be on the road, not in the garage. Therefore, in modern room construction, quality is our red line and we never reduce the quality of materials to reduce the cost.

Engineering and design stages in new room construction

One of the main differences between the construction of all types of unloading chambers in Novin Bukan chamber construction with traditional methods is the engineering approach to the production process. Before cutting even a piece of sheet, the room plans are analyzed by engineering software. Load distribution, center of gravity, wind resistance (aerodynamics) and pressure on the truck chassis are calculated.

This precise design makes the newly built rooms, despite their extraordinary strength, less weight than market examples. Less cabin weight means more useful load capacity for the driver and higher revenue per service. The technical team of Novin Chambers is always updating the designs according to the current European models.

Material science in the construction of various types of dump load rooms in the new Bukan room construction

The output quality of any product depends on its raw materials. In various workshops, scrap or second grade sheets may be used to reduce the price, but in the process of making various kinds of dump truck rooms in Novin Bukan Chamber Building, we have a strange obsession in choosing materials:

1. Anti-wear steel sheets

The body and floor of the dumping room are constantly exposed to the wear of sand, sand and stones. We use Mobarake Isfahan and Auxin Ahvaz steel sheets with ST37 and ST52 alloys in modern room construction. ST52 sheet has a very high resistance to impact and wear and increases the life of the room up to three times. The thickness of the sheets is determined based on the type of use (mining or road) and the customer's order.

2. Profile and chassis

The framing of the room must be able to withstand sudden loads. Heavy studs and industrial beams are used for the chassis in construction of all types of dump cargo rooms in Novin Bukan Chamber Building. The netting under the room (bridging) is done densely to prevent the room floor from deforming over time.

3. Advanced CO2 welding

The way metal parts are connected to each other is the Achilles heel of truck rooms. Conventional electrode welding works poorly against continuous road vibrations and has the possibility of cracking. But in the new room building complex, all connections are made with CO2 welding machines and by certified welders. This type of welding has a very high penetration and creates a unified structure.

Variety of products in the modern room construction

Our expertise is not limited to a specific model. Our production line for manufacturing all kinds of dump cargo rooms in Novin Bukan Chamber Construction is completely flexible and covers all the needs of the market:

10-wheel dump room (pair)

Ten-wheeled trucks are the most widely used means in civil transportation. The ten-wheeled rooms produced in Navin are offered in different designs such as Mylari design, Swedish design and fabric design. With more reinforcing columns, Mylari design is an ideal option for hard mining work.

Six wheel dump room (single)

For single trucks, the balance between room weight and strength is critical. In the process of making various kinds of dump cargo rooms in the new Bukan room making room for single trucks, we try to make the lightest possible room so that the driver does not have a problem with the allowed tonnage in the weighbridge.

dump truck room (mammoth and maral design)

Building a trolley room requires higher technical knowledge. Long length and high loading volume puts a lot of pressure on the center of the room. We produce two-axle and three-axle trailers inspired by top European designs such as Maral and Mammoth, which have suspension systems and standard axles.

Nissan and Isuzu room

In addition to heavy trucks, manufacturing of all types of dump trucks in Novin Bukan also includes semi-heavy and light vehicles. Nissan dump rooms with powerful jacks and durable galvanized sheets are another of our best-selling products.

hydraulic system and jack; The beating heart of the dump room

The most beautiful and strongest room in the world is useless without an efficient hydraulic system. Choosing the right jack is one of the critical steps in the construction of all types of unloading chambers in Novin Bukan chamber building. We use the best Turkish antenna jack brands (such as Hydromas) and top Iranian brands.

The basic installation of jack, pump and high pressure hydraulic hoses ensures that unloading is done smoothly and safely in any condition. Also, automatic cut-off systems are installed as standard on the products to prevent damage to the jack at the end of the course.

Coloring and visual beauty

The appearance of the truck room is the showcase of your work. A colorful and glazed room shows the professionalism of the driver. Unfortunately, many workshops do not pay enough attention to the painting stage. However, in the process of construction of various types of unloading rooms in Novin Bukan, painting is a multi-step process:

1. Degreasing and sandblasting: All metal surfaces are cleaned so that the paint sits well on it.
2. Epoxy primer: To prevent rust, a thick layer of stainless primer is applied.
3. Plastering and foundation: All unevenness and welding spots are smoothed and polished.
4. Polyurethane paint: Finally, Automotive quality polyurethane paints are used that are resistant to sun, rain and chemicals and maintain their shine.

Amenities and customized options

We believe that the truck room should be functional. Therefore, during construction of various types of unloading rooms in Novin Bukan building, various options can be implemented according to the customer's taste:

• Large and spacious tool box with safe locks.
• Steel and galvanized water source.
• Refrigerator and bed for large rooms.
• Folding and fixed ladders with easy access.
• Winch straps for easy tire change.
• New design plastic or metal fenders.
• Dual purpose rear door (book and normal) to facilitate special loadings.

Competitive price and terms of sale

According to the fluctuations of the iron market, the total price of the room is always changing. But our strategy in manufacturing all kinds of dump truck rooms in Novin Bukan Chamber Building is to provide the best quality at the fairest price. We have reduced overhead costs by buying bulk raw materials and eliminating middlemen.

You can understand the high purchase value of our products by comparing the price and technical specifications of new rooms with other manufacturers. Also, for the well-being of dear drivers, the terms of cash and installment sales (with a fisherman's check) have been considered in different time frames.

Genuine warranty and after-sales service

Our motto is: "Selling is not the end of the deal, it is the beginning of the commitment". All the products that are delivered to customers under the title of Manufacturing various kinds of dump truck rooms in Novin Bukan Chamber Construction have a valid warranty. This warranty includes chassis breakage, cracked welds and hydraulic jack operation.

If there is a problem with the room, the after-sales service team of the new room construction will fix the problem as soon as possible. This level of support makes you feel at ease about your investment.

Why do customers recommend new room construction?

Customer satisfaction is our biggest asset. Drivers who have had the experience of using the services of construction of all kinds of dump trucks at Novin Bukan Chamber Construction, introduce us to their colleagues for several reasons:

1. Good promise: We know that every day the truck sleeps is a loss, so we deliver on time.
2. Compassionate consultation: We make something that really works for you, not something that increases our profit.
3. Attention to detail: Even the smallest fittings and locks are selected from the best materials.
4. Professional environment E: Respectful treatment of personnel and orderly workshop environment.

The role of laser and plasma cutting technology

In the old methods, cutting was done with air gas, which caused deformation of the edges of the sheet and reduced its resistance. But today, CNC plasma and laser cutting machines are used in our collection to make all kinds of compression load rooms in Novin Bukan room manufacturing. This technology allows the parts to be cut with millimeter precision and to be perfectly matched during assembly. The result is a room with smooth lines, detailed sackcloth and an eye-catching appearance.

The difference between mining and road rooms

One of the common questions of customers is the difference between a mining room and a road room. When consulting for the construction of various types of dumping rooms in the new Bukan building room, we first ask for your type of use. Mining chambers require thicker sheets (eg 8 mil floor and 6 mil walls), more columns and a reinforced back door because the rock loads exert a lot of point pressure. But road chambers that usually carry gravel, sand or dirt can be made with lighter sheets to reduce the wear and tear of the truck on long routes. Our experts suggest you the best combination of sheet thickness.

The process of placing an order until delivery

To order construction of all kinds of dump truck rooms at Novin Bukan Chamber Building, you don't need to come in person. Our process is very transparent:

1. Telephone call: Communicate with the sales unit and receive initial advice.
2. Sending a proforma invoice: Detailed technical specifications and daily price will be sent to you.
3. Contract contract: The official contract is concluded with all the details and delivery date.
4. Stage report: You can receive photos and videos of the work steps during construction.
5. Delivery and Installation: After preparation, the room will be installed and tested on your truck.

Maintenance of dump room for long life

After the process of construction of dump truck rooms in Novin Bukan is finished and you have received the room, observing a few points will double its life:

• Always check the rear door lock pins before moving.
• Service the grease points of the jack and hinges monthly.
• Avoid loading more than the nominal capacity of the truck.
• Be very careful when unloading on inclined surfaces so that the chassis does not roll.

The effect of new room construction on employment generation in the region

Novin Chamber Building Group is proud to have created direct and indirect employment for dozens of local youth and specialists by developing its production lines for manufacturing various dump truck chambers in Bukan New Chamber Building. Your support for the domestic producer and new reputable brand will not only turn the wheel of the region's economy, but will also double our motivation to improve quality and compete with foreign products.

final word

The world of transportation is no place to risk on poor quality equipment. A good bar room is your business partner on the road. If you are looking for quality, beauty, strength, and reasonable price, your final destination is Bukan and the "New Room Design" collection. Our specialty is making all kinds of dump truck rooms in Novin Bukan building with standards that will surprise you.

We invite all drivers, transport fleet owners and road construction companies to experience our distinctive quality. To get more information, inquire about the daily price and get a free consultation, call the numbers listed on the site right now. Novin room design experts are eager to answer your questions. Join the large family of satisfied customers of Navin Chambers and drive on the roads with peace of mind.