Today, the use of clean and cheap fuels is one of the main concerns of industries and even residential complexes. Liquid gas or LPG is one of the best alternatives to other fossil fuels. But the storage of this fuel requires safe and standard equipment that does not endanger the life and property of consumers. Liquid gas tank production is one of the most sensitive industrial processes that must be carried out under strict supervision and using the best materials. If you are looking for a reliable center to order and buy these tanks, Safadasht Industrial Zone hosts one of the leading manufacturers in this field. Kermi Rad Production, with years of experience in the field of manufacturing pressure tanks, is known as the pole of liquid gas tank production with the best quality in Safadasht. In this article, we are going to fully review the production process, standards, advantages of using gas tanks and the reasons for the production superiority of Kerami Rod.

The importance of choosing the best liquid gas tank production center

Maybe at first glance, all tanks look similar; A large metal cylinder that holds the gas. But the main difference is in the details that cannot be seen with the naked eye. The quality of welding, the thickness of steel sheets, the type of painting and the pressure tests performed on the tank determine its useful life and safety. Liquid gas tank production is not a process in which the smallest error can be ignored.

Many workshops and factories operate in Safadasht region, which is one of the industrial hubs of Tehran province. But choosing a manufacturer that has all the necessary licenses and uses standard steel sheets is not an easy task. Understanding the sensitivity of this issue, Kermi Rad Production has built its liquid gas tank production line based on Iran's international and national standards so that customers can use the products of this collection with ease.

Critical standards in liquid gas tank production

One of the most important parts of liquefied gas tank production is compliance with mandatory standards. LPG tanks are under high pressure and any defect in their structure can lead to disaster. Standards such as ASME, which is a global standard for pressure vessels, are carefully followed in Kerami Rod production.

1. Choosing the right steel sheet

The first step in the liquid gas tank production is choosing the material. The sheets used must be of alloy type for pressure vessels (usually high quality A516 or ST37 sheets). These sheets must have high resistance to tensile and compressive stresses. In Kerami Rod production, all sheets are inspected for quality before entering the production cycle to ensure that there are no cracks or corrosion in the metal texture.

2. Rolling and forming process

After cutting the sheets, it is time for rolling. In this stage of liquefied gas tank production, the sheets are made into cylinders by heavy roller machines. Accuracy in this step is very important because any inconsistency in the radius of the tank can cause improper pressure distribution. The caps or lenses of the two ends of the tank should also be formed with powerful hydraulic presses in an integrated manner.

3. Specialized welding and welding inspection

The beating heart of the liquefied gas tank production process is welding. The use of submersible or full penetration welding methods ensures that the joints are stronger than the main sheet itself. But the work does not end here. In Kermi Rad Production, after welding, all seams are subjected to non-destructive tests (NDT) such as radiographic test (RT) or ultrasonic test (UT) to ensure the absence of air bubbles or small cracks in the weld.

The benefits of ordering a tank from Kerami Rad production in Safadasht

Why should we go to Kermi Rad collection for liquefied gas tank production? The answer lies in commitment to quality and customer focus. Safadasht is an ideal place for the production and distribution of these products throughout the country due to its convenient geographical location and access to transportation routes.

The key production advantages of Kerami Rod are:

Use of modern technology: CNC cutting machines and automatic welding machines minimize human error in liquid gas tank production.
Variety in capacity: Whether you need a 500-liter tank for a small villa or a 60-ton tank for a large factory, this set has the ability to produce liquid gas tank in different sizes and capacities.
Competitive price: By eliminating middlemen and buying directly from the manufacturer in Safadasht, the total cost for the customer is reduced.
Warranty and after-sales service: All produced tanks have technical specification plates and a valid warranty, which shows the manufacturer's confidence in his product.

Steps of installation and operation of liquefied gas tanks

After the liquid gas tank production is completed and its delivery to the customer, the installation phase begins. Tank installation is as important as its production. The installation site must have a solid concrete foundation to prevent the tank from settling. It is also mandatory to observe safety distances from buildings and sources of ignition.

Technical team Kermi Rad production besides production of liquid gas tank, also provides necessary consultations for basic installation and standard piping to customers. Installation of safety valves, filling valves, percentage gauges and safety valves must be done by experts. A high-quality tank will not work properly if it is not installed correctly.

Various applications of liquid gas tanks

You may imagine that Liquid gas tank production is only for domestic use in areas without municipal gas piping. But this is only a small part of the applications. Various industries are dependent on these reservoirs:

1. Heating villas and residential complexes

There is no city gas in many summer cottages and city gardens. Liquid gas tank production in 1 ton and 2 ton capacity is the best solution for providing heating, hot water and cooking in these places. Liquid gas burns very cleanly and has high thermal efficiency.

2. Food industry and restaurants

Restaurants and caterers who need a flame with high and uniform heat are the customers of Propa Dosak gas tanks. Liquid gas tank production for this class should be done considering the high daily consumption and the need to quickly fill the tank.

3. Poultry farms and greenhouses

Temperature regulation is vital in poultry farms and greenhouses. A gas cut can cause billions in damages. The use of liquefied gas tanks as the main fuel or reserve fuel ensures the energy security of these units. Kermi Rad production meets the needs of these large industries in Safadasht and all over Iran by producing liquefied gas tanks in high capacities.

4. Industrial factories

Many industrial furnaces, forklifts and steam boilers work with liquid gas. Liquid gas tank production industry requires compliance with stricter standards, which are fully implemented in Kerami Rad Group.

Important points in the maintenance of liquid gas tank

Purchasing and production of liquid gas tank is not the end of the job. Correct maintenance increases the life of the tank and maintains safety. Periodic visits to the valves, checking the body of the tank for rust and repainting if needed are among the measures that should be taken.

Rad Worm Manufacturing recommends that you never attempt to repair the tank yourself. Any manipulation in the body or valves can be dangerous. Service and maintenance should be done by authorized technicians. Also, in the cold season, you should be careful of the regulators freezing and use protective covers.

The difference between a standard liquefied gas tank and second-hand tanks

Unfortunately, we see the sale of second-hand and refurbished tanks in the market, which often lack the necessary safety. These tanks may have internal corrosion that is not visible from the outside. Production of new liquid gas tank in Kerami Rod factory assures you that the thickness of the sheet is the same in all places and there is no metal fatigue in it. The cost you spend to buy a new tank is actually an investment in your safety and peace of mind. The difference in the price of a new and second-hand tank is very small compared to the risks of a worn-out tank.

Painting process and corrosion protection

One of the final and very important steps in the production of liquid gas tank is painting. Since these tanks are usually installed outdoors, they must be resistant to moisture, sunlight and temperature changes. In Rad cream production, first the surface of the tank is completely sandblasted to remove any dirt and grease from the metal and create a rough surface for better paint adhesion.

Then epoxy or industrial polyurethane paints are used. These colors create an impermeable layer on the metal and prevent oxidation and rust. White or silver color is usually chosen for the tanks to reflect the sunlight and prevent overheating of the gas inside the tank. Accuracy in production of liquid gas tank even in the painting stage shows the high quality of Kerami Rad products.

Calculate the capacity required to purchase the tank

One of the common questions of customers before ordering liquid gas tank production is choosing the right capacity. This issue depends on the size of the building, the type of insulation of the building, the number of residents and the type of use (heating, hot water, cooking). The experts of Kermi Rad production in Safadasht are ready to offer the best capacity after checking your conditions.

Generally, for an average villa, a 1 ton or 2 ton tank is suitable. But for a multi-unit complex or a factory, precise engineering calculations are needed. Choosing the right capacity will optimize gas charging intervals and you won't need to fill up so soon, nor will you have to pay extra for a very large tank. Expertise in consulting is part of the professional process of liquefied gas tank production in this collection.

The role of valves and accessories in safety

A good tank is not complete without standard faucets. In liquefied gas tank production, the installation place of the valves is installed on the body (usually in the form of a flange or bushing). Filling valve, steam removal valve, liquid removal valve (for special applications), pressure gauge and magnetic percentage gauge are essential equipment.

The most important part is the safety valve. If the pressure inside the tank exceeds the limit for any reason (such as a nearby fire or overfilling), this valve opens and releases excess gas to prevent the tank from exploding. Kermi Rad Production uses the best valve brands in the market (such as Italian, Turkish and Iranian standard brands) in the process of liquefied gas tank production to complete the safety chain.

Why Safadasht is the hub of tank production.

Safadasht Industrial Zone has provided a suitable platform for the growth of metal industries due to the concentration of industrial workshops and access to steel raw materials. The presence of Kermi Rod production in this area has made it possible for customers to easily visit the factory and closely witness the stages of liquid gas tank production. This transparency in production creates great trust. The customer can see the material of the sheet, the quality of welding and how to test the tank and buy with full confidence.

Shipping and delivery of the tank

Moving large tanks is challenging. Tanks should be closed on the trailer or truck so that they are not damaged during the journey. The body color should not be scratched and the connections should not be damaged. Kermi Rad Production after completion of Liquid Gas Tank Production, provides loading services and coordination of delivery to all parts of the country. The use of suitable cranes for loading and unloading is part of the professional services of this collection.

The future of tank building industry and new technologies

The industry of production of liquid gas tank is also progressing like other industries. The use of composites in some small tanks, remote monitoring systems to measure the amount of remaining gas and improvement of metal alloys are among the innovations in this field. Kermi Rad Production is always trying to keep up-to-date with its technical knowledge and upgrade the liquid gas tank production line, keep pace with the world's technology and offer a modern product to Iranian customers.

Summary and closing remarks

Finally, it should be said that liquefied gas is a valuable, clean and portable fuel that can increase the quality of life and production efficiency. But the condition of using it is to have a safe and standard tank. Liquid gas tank production is a specialized work that is no joke. Human lives and business capital depend on the quality of construction of these reservoirs.

If you are in Safadasht or anywhere else in Iran and you need a gas tank, Kermi Rad Production is a name you can trust. A combination of engineering knowledge, practical experience, commitment to standards and customer focus has made this collection a superior choice for liquefied gas tank production. From pre-purchase consultation to installation and after-sales service, the Kermi Rad team is at your side to bring reassuring warmth to your home and workplace. Quality is not accidental, it is the result of precision in the details of liquid gas tank production, which is given special importance in Kerami Rod factory. To order and get more information, contact Kermi Rod production sales experts today and experience the difference in quality.