When it comes to the beauty, durability and health of building environments, the building floor plays a key role. In northern cities like Amol, where high humidity and special weather conditions lead to faster erosion of surfaces, maintaining the shine and health of floors becomes more important. The specialized process of Kafsabi and Sangsabi is the best solution to restore the original beauty to all types of stone, mosaic and concrete surfaces. Sangsabi Jafarian with years of experience in providing stone paving, concrete paving and mosaic paving services, is known as an expert in this field in Amel and throughout Mazandaran. In this article, we will discuss in detail the reasons for the importance of sanding in Amol, the stages of its implementation and the distinctive quality of Sangsabi Jafarian services.

Why is stone flooring in Amol a necessity?

Stone floors, despite their beauty and high resistance, get damaged, cloudy and scratched over time and under the influence of environmental factors. In Amol city and Mazandaran province, due to constant humidity, water penetration, chemical detergents and frequent traffic, erosion occurs faster.

The importance of carrying out Kafsabi in the geographical conditions of Amol can be investigated from several aspects:

1. Removal of worn layers: High humidity causes pollution to penetrate and create cloudy layers on the stone. Professional stone removal removes this damaged layer and reveals the original texture of the stone.
2. Safety and health: Uneven or perforated surfaces become places for the accumulation of pollution and the growth of mold and fungus, which is dangerous for health. Cassabi makes the surface completely smooth and uniform.
3. Repair and uniformity: During installation, the alignment of the stones may not be accurate and surface differences may occur. It is only with stone that it is possible to create a completely smooth and mirror-like surface in Amel.

Sangsabi Jafarian, with a deep understanding of these challenges in Mazandaran, carries out the process of Sangsabi using special diamond bits according to the type of your stone.

Types of damage to stone surfaces in the north

Rock erosion in Amol often includes the following, which necessitates the need for rock removal:

• Deep scratches and surface scratches: caused by moving heavy equipment or sand.
• Dullness and acid stains: especially in marble stones that are sensitive to detergents.
• Blackening of joints: Moisture penetration into the joints and the growth of moss or mold in a humid environment. Mazandaran.

The difference between stone paving and surface polishing

Many customers at Amel ask the difference between stone polishing and regular polishing. Surface polishing only creates a thin and shiny layer on the stone, which is not durable and does not fix deep defects. On the other hand, Kafsabi includes at least 7 to 10 deep sanding steps with heavy equipment, which, in addition to restoration and smoothing, restores the natural brilliance of the stone. This is a specialized process that Sangsabi Jafarian presents it in the best way in Mazandaran.

Jafarian's specialized paving services: beyond a simple sub

Sangsabi Jafarian, focusing on quality and using first-class raw materials, covers a wide range of Kafsabi services for the residents of Amol and other Mazandaran cities. Our commitment to using modern technology guarantees that the floor of your building will not only be beautiful, but also durable and resistant.

Stone flooring (marble, travertine, granite)

Each type of stone has different physical and chemical characteristics, which distinguish the stone crushing method.

• Marble marble: Marble is very sensitive to acid and needs soft sanders and strong polishers to return to its mirror state. Sangsabi Jafarian does this with high precision.
• Travertine stone sanding: This stone has a lot of voids that must be filled with special resin putties first and then the Sanding process is carried out.
• Granite stone sanding: Granite is the hardest stone and requires strong diamond bits and numerous subs. has Our team at Amol has the necessary equipment to work on the hardest granites.

Our stone polishing services include removing old stains, removing unevenness caused by installation and bringing the surface to the highest level of gloss.

Mosaic flooring and restoration of old surfaces

Mosaic flooring is a completely different process. Mosaics often become dull and uneven after years of erosion. Sangsabi Jafarian in Amol with special subs, not only removes the unevenness of the mosaics, but also restores their shine like the first day by performing the final polishing. We also provide special restoration and carpeting services for old concrete and mosaic surfaces in Mazandaran.

Concrete flooring in Amol and its industrial applications

Concrete fencing has become one of the most demanded services in industrial spaces, parking lots, warehouses and sheds in recent years. If raw concrete is not sanded, it produces a lot of dust and does not look beautiful.

Concrete paving for parking and sheds

The main purpose of concrete plastering is to create a smooth, dense and very resistant surface. This process is done by Sangsabi Jafarian with special machines that are heavier than Kafsabi Seng machines. Concrete sanding, while removing excess materials and unevenness caused by concreting, makes concrete more resistant to wear and increases the life of the floor significantly. This service can be provided in all parts of Mazandaran.

Implementation of epoxy coating after concrete flooring

In many industrial projects in Amol, after concrete casting, there is a need to apply epoxy coating. The quality of the surface preparation by Kassabi plays a vital role in the adhesion and durability of epoxy. Concrete sanding makes the surface porous and clean and ready to accept the resin coating. Sangsabi Jafarian performs both services (subbing and preparation) with the best quality.

Step-by-step steps of professional masonry by team Jafarian

The final quality of stonework depends on the number of steps and the accuracy of its implementation. The Sangsabi Jafarian team in Amol follows a standard process that results in shiny and mirror-like floors.

Substructure and repair stage (seam filling)

The first and most important step in Kassabi is preparation. At this stage, coarse roughness is removed with coarse subs. Then, the joints, cracks and holes in the stone are filled with resin and epoxy glue. This stage is very important in the final quality of the work in Amol; If this work is not done correctly, the resin will separate from the stone in the future.

Payment procedures with diamond pieces (subbing)

After the resin dries, the main process of carbonizing the stone begins. It consists of several consecutive grinding steps with different numbers of diamond bits. Coarse bits (No. 60 to 120) are used for deep shaving and initial smoothing, gradually progressing to softer bits (No. 220 to 800). The purpose of these steps is to remove the lines and scratches of the previous steps and prepare the surface for gloss.

The final stage of polishing and polishing (mirroring)

In the final stages, softer subs (1500 and 3500) and glossy subs (such as lacquer pad and Italian sub) are used. This stage, which is the heart of sanding, creates a mirror-like luster on the surface of the stone. Sangsabi Jafarian in Amol is committed to making your floor surface shine as much as possible.

Factors determining the price of flooring in Mazandaran

The price of Kafsabi in Mazandaran is determined based on several criteria and it is not possible to declare a fixed rate for all projects. Sangsabi Jafarian conducts a free visit and provides an accurate pre-invoice before starting work.

Size and type of services

Obviously, the size of the project has a direct impact on the price. Also, the type of surface (stone, mosaic or concrete) and the type of requested sub (for example, full polishing for a marble stone in Amel costs more than a simple sub for an old mosaic) is effective in determining the rate.

The current state of the surface and the need for repairs

If the stones have multiple fractures, deep cracks or stubborn stains, more repair and resining steps are needed, which will add to the final cost of the stone. To get an accurate estimate of the cost of stonework in Amol, we recommend contacting Sangsabi Jafarian.

Sangsabi Jafarian's commitment to quality and customer satisfaction

In the competitive market of construction services of Amol and Mazandaran, what distinguishes Sangsabi Jafarian is the commitment to use the best equipment and raw materials (such as diamond bits and foreign resins). We guarantee the quality of our work and our ultimate goal is complete customer satisfaction with the final shine of the floor. If you are looking for a reliable and experienced team for Kafsabi Sang in Amal or Mazandaran, Sangsabi Jafarian will be your best choice. We will ensure your project is carried out to the highest standards by providing honest advice on the best type of sub for your floor.

Finally, if the stone surfaces of your home or workplace in Amol or any other part of Mazandaran are dull, uneven, or the seams are darkened, it is time to experience the professional services of Sangsabi Jafarian with a simple call.

Conclusion: A reliable choice for flooring in Amol

Kafsabi and Sangsabi is a long-term investment in the beauty and durability of your building. According to the weather conditions of Amol, it is necessary to entrust this specialized work to professionals such as Sangsabi Jafarian. We provide stone paving, mosaic paving, and concrete paving with guaranteed quality and competitive prices in Mazandaran. Contact us today for a free visit and expert advice on stone paving your floors.