Why is it important to change the plastic radiator to aluminum?

The steps of converting the radiator top and bottom from plastic to aluminum

1. Initial survey and measurement

2. Removing the plastic parts

The plastic top and bottom parts are separated by thermal or mechanical tools. This should be done carefully so that the edges of the blades or the middle grids are not damaged.

3. Making new aluminum parts

In the Flamerzi radiator workshop, new aluminum parts are made with an argon welding machine and they are matched exactly to the previous size. The quality of aluminum welding is very important, because it must be completely sealed so that no leakage occurs.

4. Final assembly and pressure testing

After installing the aluminum head and bottom, the whole radiator is subjected to pressure and temperature test. In this test, the performance of the radiator is checked under conditions of high temperature and rapid flow of water to ensure that there are no leaks or structural weaknesses.

Advantages of converting the radiator to aluminum

Conversion of the plastic top and bottom radiator to aluminum has many advantages, which are both technically and economically important. These benefits include the following:

1. Increased thermal resistance: Aluminum can withstand much higher temperatures than plastic without deforming or cracking.

2. Increasing the life of the part: If the conversion is done carefully by the specialists of Flamerzi radiators, the life of the radiator will be increased by more than two times.

3. Reducing the possibility of leakage: Aluminum parts are more resistant to pressure and heat and reduce the possibility of coolant leakage.

4. Improved engine cooling performance: Aluminum has a higher thermal conductivity, so heat transfer from water to air is faster and the engine remains at a stable temperature.

5. Beautiful and more professional appearance: Many car enthusiasts prefer their car to look professional in terms of technology and appearance; Aluminum radiator has a more beautiful effect than plastic models.

What cars are suitable for conversion?

Plastic top and bottom radiator conversion to aluminum is usually done for light vehicles such as Peugeot, Samand, Pride, Tiba, Dena, as well as heavy vehicles such as trucks, buses and road construction machinery. In fact, any car that uses a plastic radiator has the capability of this conversion.

Flamerzi Radiators, with experience in working on domestic and foreign brands such as Hyundai, Kia, Toyota, Nissan, Volvo, Benz and Mann, is ready to provide these services for all models. If needed, even the ability to design aluminum radiators is provided so that the customer can choose the best option depending on the type of engine and installation space.

The difference between aluminum and plastic radiators from a technical point of view

In terms of physical properties, aluminum has a high thermal conductivity (approximately four times more than heat-resistant plastics). This feature makes the engine heat dissipate faster. In addition, aluminum is structurally light but strong, while plastic may break under impact or increased pressure.

In the repairability section, aluminum radiators are superior to plastic models. Plastic will practically have to be replaced if it cracks, but aluminum can be rewelded. The same thing makes the life of radiators converted by Flamerzi radiators to be much longer than factory samples.

Maintenance tips after conversion

After converting the plastic top and bottom radiator to aluminum, following a few simple tips will increase its durability and efficiency:

1. Using quality and standard antifreeze and changing it regularly according to the season.

2. Periodically checking the water level of the radiator and keeping its networks clean from dust.

3. In heavy vehicles, control the pressure of the water pump and hoses to prevent a sudden increase in pressure.

4. Regular visits for cooling system service at reputable centers such as Flamerzi Radiators.

Flamerzi radiator specialist services in radiator conversion

Flamerzi Radiator Manufacturing is one of the most reliable repair and manufacturing centers for all kinds of radiators in the country, which, relying on technical expertise and the use of modern devices, performs the service of converting plastic to aluminum radiators as a guarantee. This complex is not only involved in the repair of passenger cars, but also in industrial systems and heavy machinery.

The specialty of this collection is:

Conversion of plastic top and bottom radiators to aluminum
Complete construction of new aluminum radiators for special cars
Repair of leaking and broken aluminum radiators
Complete car cooling system service
Pressure, temperature and specialized sealing test

In all these processes, precise aluminum welding and high-quality raw materials are used so that the final product has a long life and optimal performance.

Final summary

Converting the plastic top and bottom radiator to aluminum is a smart move to increase the life and efficiency of the car engine. This conversion not only avoids heavy repair and replacement costs, but also results in more stable performance at high temperatures. To do this, you must visit specialized and reliable centers to meet technical and safety standards.

Without a doubt, Flamerzi radiator making is the best choice to perform this operation. With its brilliant history, the use of expert staff and the use of advanced equipment, this complex has been able to win the trust of light and heavy vehicle owners. If you want to turn your radiator into a strong and durable aluminum model, referring to Flamerzi radiator manufacturing is a safe and economical way that guarantees quality and ensures the optimal performance of your car engine.