Preparation of the soil bed: First, plow, level and harden the planting bed (between the rows of trees). Make sure there are no large rocks or balls on the surface that could tear the nylon.
Spreading the nylon: Spread the roll of nylon along the length of the growing bed. Make sure that the nylon is completely smooth and without wrinkles. Wrinkles can cause water to accumulate and nylon to rot.
Fixing nylon: Cover the edges of the nylon with soil or use special plastic nails to fix it to the ground. This will prevent the wind from blowing and moving the nylon during the growing season.
Installing the Drip Tubing: Place the drip irrigation tubing exactly in the center of the nylon and on top of it. The distance of the drippers should be proportional to the distance between the rows of crops and the water needs of the trees. Creating gaps for the trees: At the base of the vines, make small slits in the nylon with a sharp knife or a special cutting device so that the tree roots can pass through these slits and access the soil below. Be careful that the cuts are not too large so as not to interfere with weed control.
System Flushing: Before starting the main irrigation, turn on the irrigation system and adjust the water pressure to make sure there are no leaks.

Leave a comment or ask a question about Floating Irrigation Nylon Rolls for Vineyards: A Comprehensive Guide to Increasing Yield and Reducing Water Consumption.