The main components of the truck mixer hydraulic system
Hydraulic pump
Hydromotor
Reduction gearbox
Tank, filter and oil cooler
What is the role of Davits motor in the track mixer?
Correlation between Deutz engine power and hydraulic system performance
- Engine power
- Engine torque
- Working speed
- Pump capacity
- Working pressure
- Oil flow rate
- Hydromotor capacity
- Gearbox reduction ratio
- Boiler weight and capacity
- Environmental and working conditions
How does the truck mixer's hydraulic system turn the pot?
The most important signs of failure of the truck mixer hydraulic system
Reduce the speed of rotation of the boiler
Abnormal sound of pump or hydromotor
Increase in oil temperature
Poor movement at full load
Hydraulic oil leak
Why is it important to maintain the truck mixer's hydraulic system?
Davits engine; When to check its performance?
The difference between engine power loss and hydraulic failure
How to choose the right hydraulic system for the truck mixer?
- What is the capacity of the boiler?
- What is the operating weight of the device?
- In what conditions should the boiler work?
- What is the maximum required torque?
- What is the power and working speed of the motor?
- What flow rate and pressure should the pump provide?
- What capacity and specifications does the hydromotor have?
- At what ambient temperature will the system operate? Did it?
- How is oil cooling done?
- To what extent are consumables and spare parts available?
Common mistakes in track mixer service
When is expert repair necessary?
summary; Motor and hydraulic coordination, the key to truck mixer performance
Frequently asked questions about the hydraulic system of the truck mixer
What is the function of the truck mixer hydraulic system?
Does the devits motor directly drive the track mixer?
What is the reason for the slow rotation of the track mixer?
Why does the truck mixer hydraulic oil get hot?
Long operation, high load, insufficient cooling, improper oil, clogging of the track or internal leakage are possible causes of temperature increase.
Does increasing the power of the Davits motor always increase the power of the track mixer?
No. The power of the engine must be in harmony with the capacity of the pump, hydraulic motor, gearbox and the actual needs of the device. Increasing engine power without a coordinated design of the whole system does not necessarily create better performance.
What are the most important parts of the truck mixer hydraulic system?
Hydraulic pump, hydraulic motor, control valves, oil tank, filter, cooler, hoses, connections and gearbox are the main components of this set.
How often should the truck mixer hydraulic system be checked?
The service interval depends on the model of the device, the level of operation, the type of oil and the manufacturer's instructions. However, checking oil level, leakage, condition of hoses, working temperature and filters should be done periodically.
Where should we start to troubleshoot the truck mixer hydraulic system?
It is better to start troubleshooting from the power source and then check the power transmission path, pump, pressure and flow circuit, hydromotor and gearbox. Replacing parts without identifying the root cause is usually not a reliable solution.
What number should we call for advice about Davits engine and truck mixer hydraulic system?
To receive information and advice, you can call 09121307144 and to view more information, visit s-visionco.com.
