The desired electric motor with the following specifications is as follows:

1. Model: HWDE 1481
2. Type: DU 50/4-50 SX
3. Serial number: 2506
4. Code: K200-600-649
5. Product code: 0103-0023
6. Frequency: 50 Hz
7. Phase: 3 phases
8. Voltage: 400 volts
9. Speed: 1350 rpm (г/min 1350)
10. Degree of protection: IP 00
11. Insulation class: Class F

Description of motor components:
1. Engine model and type: HWDE 1481 model and DU 50/4-50 SX type indicate a specific series and type of engine that may be designed for specific industrial applications. 2. Serial number and product code: These values ​​are used to accurately identify the engine and follow up if after-sales service is needed.
3. Frequency and phase: The frequency of 50 Hz and 3 phases of the motor indicates compatibility with industrial electricity standards in many countries.
4. Working voltage: 400V, which is usually used for industrial applications.
5. Engine speed: 1350 rpm, which is a relatively low speed for an industrial engine. 6. Degree of protection: IP 00, which means no protection against dust and water. This shows that the engine should be used in clean and dry environments. 7. Insulation class: Class F, which indicates the ability to withstand high temperature by the insulation of the motor.

Motor applications and features:
This motor can be used in various industrial environments that They need to use electric motors with relatively low speed and medium power. Three-phase motors with a voltage of 400 V are usually used in large industrial equipment, machinery and pumping systems.

Important note: Due to the low degree of protection (IP 00), the use of this The engine is not recommended in humid or dusty environments. Also, the insulation class F allows the motor to withstand higher temperatures, which can be useful in hot industrial environments.

Maintenance and care:
To maintain Regular and periodic maintenance is essential for optimal engine performance. This includes checking coils, bearings and other mechanical parts to ensure there is no wear and tear. Also, to avoid thermal damage, proper cooling systems should be used.