Behzi
1740477211404.webp

sellers

specifications

description

Comments

sellers

No sellers available for the product with the above specifications.

General specifications

No specifications have been registered for this product.

PASS

Pass is a two -component resin coat, one component of which is cement powder and the other component of emulsion resins. It resists positive hydraulic water pressure to high water height. This resistance depends on the final thickness of the product and it is recommended to be at least 2 mm.

The range of consumption

Preparation:

Complete the entire surface of the dust, oil, etc., and the walls should be muscular and the surface should be fully level. To repair the surface, the product will be used in the golden Aurora. Before executing the resin, it must be completely saturated with water. There is no extra water on the work surface.

Mixing and executing:

Pour the resin in the appropriate tank and can be added to 2 liters depending on the desired performance. Gradually add the powder to the above solution while mixing with a low-rpm mixer (about 500-500 per minute) Consumption is one hour at 20 ° C and reduces the temperature with increased temperature. Complete until the end of the consumption. Mixed the mixture with a one -hand brush so that the layer thickness is not more than 1 mm and after drying the second layer for the first layer (fabric and fabric). So that the layers are about 2 mm thick. Each of this product covers about 3 to 4 square meters.

Method of use

When making concrete, add the calculated additive to the concrete with mixing water and continue the mixing for 3-5 minutes. It can also be added to the ready-made concrete mixture and after the concrete is completely mixed.

Physical and chemical

PASS پوشش آببندی پلیمری

Properties and effects

PASS پوشش آببندی پلیمری دوجزئی سطوح

Applications

For sealing concrete ceilings, water tanks, pools, fountains, refineries and other water protection structures under positive water pressure Insulation and relief of services, walls

Note

It is not recommended to use it at temperatures below 10 ° C. Keep in the first few days of drying.
پوشش آببندی پلیمری دوجزئی سطوح

How to pack

Powder: Bag 10kg Liquid Resin Section: Gallon 4kg

Maintenance conditions

The product can be maintained for 6 months under standard warehouse conditions.