One of the spare parts of the rotatoators is the clutch guard. A variety of guards including clutch guard and simple guard are common in the market. Simple guards are used where there is no possible obstacle to the blade and battalion components and does not pose a threat to components, such as fertilizer guard. A clutch guard model is a clutch guard. The clutch guard is such that one side has a clutch clutch. The clutch is made up of two plates and the middle pad. The two plates are interconnected by spring pressure and transmit the rotational movement. When the rotato blades have a barrier, it has difficulty to rotate. The opposite pressure and load reaches the clutch of the guard and overcomes the springs and slips two plates, thus stopping the active power of the active power for a short moment and the pressure of the blades less. Also, the pressure is not transferred to the tractor gearbox. This makes this mechanism for the majority of the rotating components of safety. It provides safety for both blades, gearboxes, and rotators' shafts because it makes it easy for them to rotate for a moment to pass through the barrier and maintain the gearbox and tractor parts because it does not reach the tractor components more or less. The rotato clutch guard is located between the tractor -driven axle and the rotato gearbox and transmits the rotational power. Tips that are important about the work of the guardian or cardboard first must work even in horizontally and do not angle over the horizontal axis. Because it shakes and depreciates the pieces and lame during the era. The second point is the safety of the Rotivator clutch guard, which must be protected while working and even at all moments and not used without a shield.