2 x 3 Warman design filtering pump

Filter Press Pump is one of the most important components of the mineral processing system. The pump has a task of moving the slurry with high pressure into the plates of the filter presses to perform the operation of water separation from solid particles with high efficiency. In fact, a proper pump press filter cannot produce low -quality cakes and high quality. The correct selection of the filter pump has a direct role in the life of the device, energy consumption, filtration quality and water recovery.

Why is it important to use a filter press pump in the mine?

In many processing factories such as iron ore, copper, gold or sand concentrates, ticker or tank tank still has a lot of moisture. If this slurry is excreted directly: • A lot of water is wasted. • It is costly to carry and bury it. • In the long run it damages the environment. Using a high -pressure pump, the slurry enters the press filter and eventually converts to dry cakes with 12 to 5 % moisture. This process saves water, reduces transportation and maintenance costs, and increases overall system productivity.

Technical Features of Press Press Pump (3 × 3)

In industrial dewatering systems, the pump must be capable of producing high pressure and variable discharge. One of the most commonly used pumps in this area is 3 x 3 inches in size that has the following features:

✅ Dubai (volumetric capacity): 70 to 125 cubic meters per hour

head (pumping height): Maximum 70 m

Floating

✅ Frame plate and cover plate: gray cast iron

Vertical

✅ engine 37 to 55 kW Guanglu- Round engine 1480- Round pump 1050 Round

; Butterfly diameter: 48 cm

These pumps fall into the category of high -pressure centrifuge pumps and can transmit abrasive fluids with minimal depreciation.

What is the difference between a filter press and ordinary pumps?

Many engineers mistakenly use ordinary slurry or slurry pumps to feed the filter presses, but there are important differences:

What are the characteristics of a proper filter press?

✅ Ability to produce fixed and high pressure even at the end of the dewatering cycle ✅ Tolerance of abrasive solid particles without reduced efficiency ✅ Butterfly and body -resistant body ✅ Package butterfly for centralized pressure ✅ Easy installation on the chassis of the filter ✅ Compatible with automatic control of Membrane or Chamber filtering devices

In what industries is the filter presses used?

✅ Iron, copper and gold processing factories, silica, nephelin synet and ... ✅ Sand mines ✅ Ceramic chemical and tile industries ✅ Industrial wastewater treatment units ✅ Food, pharmaceutical and petrochemical industries ✅ And wherever you need to dehydrate sludge, slice or slurry.

Important Tips on Purchase Press Press Pump

When purchasing the appropriate pressure pump for the filter, consider the following: The type of pumping material (the type of slurry, abrasive or not) ✅ Maximum pressure required by the filterpress device ✅ Slurge volume per cycle ✅ Type of control system (automatic or manual) It is recommended that you use pumps that have actual performance tests in the same condition of your mine.

Conclusion

Pump 3 to 2 Warman for filter presses is the heart of the industrial dewatering process in mines and processing industries. Choosing an appropriate pressure pump not only increases the efficiency of the press, but also plays a key role in reducing energy consumption, reducing depreciation and extending the useful life of the device. If you are looking for specialized advice on selecting, purchasing or repairing the filter pump, the Taliban Technical Team is ready to provide the best dewatering equipment.