Kenaf work or Kenaf false ceiling is the process of making internal ceilings using Kenaf. Kenaf is a plaster-like material that has high resistance and can be shaped easily. In knaf kari, knaf pieces are installed on the building as roof covering.
Kenaf work or Kenaf false ceiling is the process of making internal ceilings using Kenaf. Kenaf is a plaster-like material that has high resistance and can be shaped easily. In knaf kari, knaf pieces are installed on the building as roof covering.
What are the technical tips of implementing cannabis?
Thin steps after the firm finishing
The stages of fine work after the end of hard work are:
1. Run the Conditional Channel or consider the location of the fan coil
To install the channel, it must be taken into account that the channel must be 20 cm higher than the ceiling, so that during the installation stage of the channel, the places of the channel that pass over the channel will not be cut off. In environments with heights of 2.65 to 2.75 cm, 12 to 15 cm is the best and most appropriate height of the Kenaf box. The edge of the hidden light should be 6 to 8 cm.
2. Implementation of pipelines and wires
In the stage of piping and wiring of the building, several points are important:
- باید در محل‌هایی که کناف انجام می‌شود حتما برق رسانی کنید
- طرح و اجزای طرح مشخص شود
- داخل لوله‌ها سیم عبور داده شود تا از مسدود شدن لوله برق‌ها در مرحله سفید کاری و گچ کاری جلوگیری شود
- در آخر گچ کاری اجرا شود.
- در آخر قبل از اجرای کناف ساختمان باید سفید کاری شود تا از شکست یا ایجاد موج در خط نور لامپ ریسه‌ای (لامپ شلنگی) جلوگیری کند.
- نصب كناف و سيم كشی كناف
- قبل از این که کناف را بتونه کاری و درزگیری کنیم و پس از این که در مرحله کناف کاری گچ کاری را اجرا کردیم باید داخل باکس‌ها و طرح‌های اجرا شده سیم کشی شوند.
- اجراي نقاشی و كابينت
The role of false ceiling and 60x60 tile in beautifying interior decoration and design is very high. The roof of the house is one of the most important and key components of the building, which plays an important role in changing the decoration and environment of the house. From the past to the present day, the roof of the house has played a great role in the beauty and environment of life and business.
Before the construction of the building, whitewashing should be done to avoid breaking or creating waves in the light line of filament lamps (hose lamps). ) to prevent.
3. Running the painting and cabinet
Painting should be done in the form of undercoating and cleaning and mastic of the surfaces so that the final stage of painting can be done after the implementation of the cabinet and closet.
4. Run the wall paper or stone facade
It can be said that the final stage of the building is the stage of installing the wall paper and simultaneously installing the stone facade, as well as the installation of hidden light filaments and halogens.
Simple Decor Box Run
They are the simplest and cheapest things that can be done for the false ceiling and the interior design of the house and the ceiling of the bedroom or the ceiling of the kitchen. To harmonize the elements in the room and the space, the colors of the bedspread can be used with the carpet and curtains. The most important thing in lighting is the execution of knaf, which gives a wonderful appearance.
The driving arm of the Kenaf design and the beautiful front of the house and the environment are light and color. In the upper part of the kitchen counter and the hidden light and even the lampshade box, the area becomes very soft and pleasant with the implementation of the open arch. When light and color are combined, they create a different effect in the interior. Architects and designers believe that the false ceiling can double the effect of the space by coordinating the spaces and the floor.
What is the ingredients of the Capper Gypsum plates?
Water is one of the required additives in Knauf plasterboards. A mixture of two plaster frames and stucco plaster of Knauf plasterboards, which is mixed in a mixer and spread on a moving belt. This material is placed on a special paper strip, at the end of which the knaf material is placed between two papers, and after it is cut, it is entered into the drying machine in a standard and specific size, and then it is sent to the warehouse or the project and the market. It turns.
