Why is Bhutan's package service important in Noor?

Signs of the need for an urgent service for the Bhutan package

1. Decreasing the temperature of hot water consumption: If you notice that the hot water in the bathroom or kitchen is not as hot as it used to be, or it keeps getting hot and cold, the package converter is probably clogged.
2. Continuous pressure drop in the package: Frequent lowering of the pressure gauge needle of the package indicates the presence of a leak or failure in the expansion source. Pulling during the operation of the package usually occurs due to the accumulation of sediment in the converters or pump failure.
3. Radiators not heating properly: If the radiators do not have the desired heat even though the package is on, the system needs ventilation, circuit washing or service of the butane package in the light.

Expert investigation of the reasons for the pressure drop in the butane package

There is a leak in the heating circuit

Package expansion source failure

Failure of the package filling valve

Step-by-step steps to remove the pressure drop of the butane package

1. Finding the exact location of the leak: Checking the valves under the package, hose connections, radiators and the bathroom towel dryer.
2. Checking the air pressure of the expansion source: Measuring the air pressure inside the source using a special manometer and injecting air if needed. It doesn't drip.
3. Resetting the pressure of the device: Open the package filling valve (usually a black or blue valve under the device) until the needle is on the number one and a half and then close it completely.

What is butane package acid washing and when is it necessary?

The benefits of periodic acid wash butane package

• Increasing the heating speed of the consumed water: As the sediments are removed, the heat transfer will be done quickly and hot water will be available to you immediately after opening the valve. Acid washing solves this problem completely.
• Increasing the life of the parts: Reducing the working pressure on the pump and the main converter prevents the premature wear of the package parts.
• Improving the heat of the radiators: With the flow of water in the heating circuit, the radiators are heated uniformly and with maximum power.

Safety tips and service standards of Bhutan package in Noor

Checking the smoke and chimney exhaust system

Testing thermal and safety sensors

Ventilation and washing of the radiator circuit

Why Mohammadi heating and cooling facilities?

Summary and recommended actions