Polyethylene fittings are used in all polyethylene pipe applications and all polyethylene pipelines. These connections are very important because most errors and problems happen in the parts where there are connections.
Polyethylene pipe fittings
If the fittings are not selected and installed correctly, or low-quality fittings are used, and the welds between the fittings and pipes are not done well, according to the standard and instructions, the whole project will fail, and a high cost must be paid to repair the problem. . Due to the characteristics of high flexibility, good resistance to many acids, bases and salts, and having the standard of drinking water for human use, low cost, high quality, and very long life, these connections are a very suitable alternative to other types of connections.
What are polyethylene pipe connections?
Polyethylene fittings are used in pipelines and facilities in various industries to change the angle of the fluid flow, change the diameter of the pipeline, change the flow rate and connect the pipes to each other. They get it.
These connections, like polyethylene pipes, are produced and supplied from polyethylene raw materials PE80 and PE100 with different angles and sizes.
According to their needs in different projects and applications, polyethylene pipelines are connected by means of various polyethylene connections (electrofusion, welding and screwing). For example, for gas supply projects, electrofusion fittings are used, and for water supply projects, screw fittings are used up to a pressure of 10 atmospheres. For the rest of the projects, polyethylene welding joints are used according to the German DIN16963 standard.
