How to calculate the price of the cooler channel
The cost of ducting the cooler is usually declared per square meter. Of course, this type of price calculation is for large areas and on average more than 50 square meters. For small areas, the channel builders usually announce the price of the cooler channel in the form of an estimated interval after the visit. In the following, we intend to explain the reasons for the non-fixed price of the cooler channel and the limits of the cost of channeling.
Calculate the cost of channel cooler and its metering method
To calculate the price of water cooler ducting, the perimeter of the channel or opening is multiplied by the length of the channel and the unit cost. The retail form is calculated and considered 10-30% higher. In this visit, in addition to the size of the ducting space, the type of ducting and whether it is round or square and whether hose or flexible raw materials should be used, the price of each meter of cooler ducting will be checked.
Factors affecting the cost of channel cooler
As we said at the beginning of this article, the cost of channeling is announced in a limited way. There are many factors influencing the unsteadiness of the cost. These factors include:
Channel type
The cooler channel is divided into several categories in terms of material:
Galvanized channel: the price of the cooler channel sheet is more suitable and has more access than other types, but it must be insulated.
Flexible channel: this channel It has high flexibility and does not require insulation, but only a circle is produced.
Pre-insulated channel: Phenolic, polyurethane and elastomeric channels are among the types of pre-insulated channels that have insulation and their implementation steps are few.
Plastic cooler channel: The price of the plastic cooler channel is lower than other channels, but it is not recommended due to its lower resistance.
Also, they are divided into two categories in terms of appearance:
Round cooler channel: These channels create less friction and have better efficiency. But they are difficult to operate and are suitable for places with large spaces.
Square cooler channel: Channels suitable for small and accessible spaces that have a higher friction surface.
Each of these cooler channels has an appearance And their gender, they have different cost compared to each other and change the cost of channelization.
