The difference between UTM and Shamim
UTM system is a global system, but Shamim system is a national system. The existence of both of them is required in order to obtain a single-page document from the registration offices. Actually, the difference between UTM and Shamim is that UTM map and Shamim map are necessary. That is, in all registration offices, the presence of UTM map and field registration map in the Shamim system is necessary. With the difference that the UTM map is registered when the file is submitted to the office, but the Shamim Cadastre map is presented at the end of the process of preparing the document.
To get more information about the tariff for the preparation of the UTM map. For the preparation of Shamim registration map, please contact the numbers on the site.
What methods can be used to prepare a UTM map of a single sheet document?
Using these documents, you can convert property with a documentary, benchmark, booklet, etc. into a single -leaf document. Currently, the single -leaf document has the highest credit in the legal authorities. This way, referring to the engineering offices to prepare the UTM map has become much more than before. The UTM map contains a single leaf document contains the location of the property and each property has a certain coordinate. This will eliminate the possibility of registering two documents for one property. If you are looking for fewer problems, be sure to think about the UTM map. This system helps to create less problems in property and real estate transactions for people who do not have much experience in this area. Solutions to prevent fraud. Because in that case only one document in the name of a specified person is issued for a property.
Review of utm map applications:
1. Using the Mapping Camera for UTM Map Total Station Mapping Cameras are a mapping tool for this method. After the mapping using these cameras, special software is required to be able to locate the map with large scales such as 1: 2000.
2. Use GPS Double Frequency
Usually, this GPS is connected to Shamim and the surveyor can easily determine the status of a property. After harvesting the four corners of the property, using the special software, the dimensions and size of the property will be identified. After this, the map layout is done. It is better to prepare a single -leaf Document Map by the engineer engineer to use its credentials and signature.
3. Combining Camera and GPS Dual Frequency
This method usually makes the work accuracy much greater than the previous two methods. Usually in places where there is a lot of fractures and the many trees in the area, this method will be very useful. The Total Station and GPS camera will make it very easy for the surveyor and on the other hand. The quality and accuracy of the map also increase.
What is the application of the Shamim system?
Map, which is actually the UTM maps that must be registered in the Shamim system. In addition to the exact location of the property and the sides as well as the environment and area of the real estate, the important point is that the system is less than 5 cm, so its maps are highly valid. >
The most important use of the Shamim system is: 🔹 Creating a comprehensive real estate map in the country 🔹 Map with Shamim System in Hard areas 🔹 Metter geographic coordinates of real estate in the country's real estate and property registration office 🔹 Failure to register without accurate coordinates 🔹 Disconnection of problems such as attacking real estate and accurate real estate location after various events such as floods and earthquakes
When mapping if there is not enough space and there are many trees and buildings, you must
an important point about the Shamim system is to implement columns and other map operations. Could not be used. because the accuracy of these maps is greater than millimeters and this system is not so accurate, so cannot be used
Contact the following number to perform immediate UTM and Shamim mapping: 09117488143 Engineer Sohrab Goli Chenari
