Although water and sewage piping in today's buildings has made people comfortable, comfortable and comfortable doing many things, sometimes pipes can create many challenges and problems for them. Many people use different chemicals and acids during the cramps. Although acids may initially alleviate pipe problems, they can cause many problems and risks in the long run. The following will discuss the risks of acid pouring into the well and sewer pipe.
As mentioned, the pipes in the building's piping system become cramps after a while. In fact, the extra masses that attach to the inner surface of the pipes can be due to fats from food, food stuck, and so on. Since acids have high levels of corrosion of the material, they can easily disintegrate extra material and contamination in the pipe path and open the path. Although one of the most important standards of production of pipes and fittings, especially polymer pipes and fittings, is the resistance to chemical resistance and using dichloromethane as a chemical representative of this capability, the use of acids in opening pipes and sewage wells can have problems and can have problems. Acid pouring into the well and sewage pipe
As mentioned, acids have high corrosion power and can simply solve different materials, so they are widely used. Using applications to open the congestion of Polyka pipe, water pipe and sewage well, although initially resolved and open the way, can lead to risks and consequences, the most important of which are as follows:
corrosion and piercing
Although water and sewage pipes are produced under various standards, such as resistance to chemicals, they are corroded and decomposed if they are in contact with chemicals and strong acids for a long time. If over -use of acids to clean the pipe and remove their obstruction, severe caries and corrosion may result in fractures and leakage of pipes, which will eventually cost a lot of pipe repair and replacement.
In water and sewage pipeline systems, various joints such as adhesive fittings, welding joints, uurotic joints, etc. are used, and each of these connections can have its own strengths and weaknesses. The connection point of the pipes can be of high sensitivity and can cause leakage and cause a lot of damage if eaten by acids.
Another danger and consequence of acid dumping in the well and sewage pipe is the possibility of eruption of the well, which can cause serious damage to the skin and eyes of people. Acids can emit highly toxic and dangerous gases, the most common of which are chlorine, methane and hydrogen, each with dangerous consequences for the human body. Some of these toxic gases can cause blindness, cerebral palsy, etc.
. It should also be noted that the gases in the well have high flammability and may be ignited by the slightest accident and lead to accidents such as explosion and should be used in chemicals and chemicals.
The use of acid to open the building's sewage pipe cannot eliminate the problem of blockage and clogging 100 %. The problem may be resolved after using acid for a while, but this problem is not resolved in general because acidic solutions do not have the overall cleansing power of the pipes and the sediments in the pipe walls are difficult to remove.
As mentioned, the use of acid in the well and the sewage pipe is not recommended due to its problems and risks, but if people would like to use it, they should consider a variety of points, the most important of which are the following:
should be used when using acids and gloves. 15 minutes of contact with cold water
to buy special pipe acids because some of these solutions are for fat and food particles and some have other uses.
to use acidic solutions to the manufacturer's instructions.
After the acid pouring into the sewage well, the air should be ventilated by the fan, cooler and ventilation.
The best way to open pipes and sewage wells
Depending on the risks and consequences of acid use in the well and sewage pipe, it is best to use other ways to prevent people's health and reduce financial damage. Before using different methods of opening pipe, it is best to determine the main cause of pipe blockage and cramps as different factors may cause such problems. This can be used to use the consulting services of the opening companies. Generally, the following methods can be used according to the type of pipe clogging after specifying the cause of pipe cramps.
Pouring Boiling in Sewage Well
pouring vinegar into pipes and wells
pouring salt in pipes and sewage wells
pouring edible salt and boiling water in pipes and wells
use pumps
