When air conditioners have clean and dust-free filters, vanes and coils, they have better performance and quality and also create a more suitable air flow for your environment. If you are planning to buy a gas air conditioner, it is better to familiarize yourself with the service steps of this device beforehand. If you feel that the quality of cool or hot air in your air conditioner is not the same as before, it is definitely time to wash your air conditioner panel. In this article, we will teach you how to clean all internal components at home without paying for the air conditioner service. After completing all the steps, you will definitely see its effect on the better performance of the air conditioner.
Step by Step by Cooler Service
The first step is to cut off the electricity The first step in the way of gas air conditioner service is to cut off the power of the device so that it does not threaten you and you can safely perform the split service. Depending on the type of air conditioner, to cut off the air conditioner, you must either pull the plug from the side of the panel or disconnect the gas air conditioner's power fuse from the fuse box of your home. If you don't know which fuse is related to the air conditioner, you should turn on the air conditioner and cut off the fuses one by one, when the split turns off, it will be clear which is the corresponding fuse.
The second stage of the air conditioner service is to wash the panels In the next step, to wash the air conditioner panel, we must go to the front frame of the split panel and open it (depending on the type of air conditioner, if the door has screws, you must use a screwdriver to open the frame) and then its filters. We pull out, which is usually two in number, and clean using water pressure. so that all the dirt and dust on it is cleaned. Then we pull out the cooler sensor and clean it and finally put it in its place. This sensor, which is responsible for checking the ambient temperature, gives the main board of the cooler an automatic on and off command. And not cleaning this part will cause a wrong command to the board and cause disruption.
The third step of washing the coils
Washing split coils is one of the main and important stages of air conditioner service, these coils act like a car radiator and must always be clean so that they can communicate well with the environment and transfer the cold to the interior of the house. To wash the coils, you can spray the coils with water from a sprinkler (until they are completely wet) and then use a brush or toothbrush to run vertically on the cooler coils to clean all the lint and dust.
The process of air conditioner service and split service includes various things, such as washing the evaporator (internal unit), washing the drain path and drain pipe of the air conditioner, and washing the condenser (external unit). By following the steps mentioned in this article, you can perform an important part of your air conditioner service.
