Maintenance of pool facilities
1. Quality control and chemical balance of water and swimming pool and hot tub maintenance 2. Floor sweeping operations (physical cleaning of water) 3. Standard water temperature control 4. Washing and cleaning filters 5. Controlling the operation of dry and wet sauna (steam) and checking and general visit to the engine room of the pool and...
Chemical balance of water and pool and jacuzzi maintenance If the pools are not operated and managed properly, they provide a suitable platform for the transmission of diseases and the growth of bacteria, and as a result, they become a threat to people's health. Therefore, one of the most important and routine tasks of the pool maintenance contractor is to measure the chlorine and pH of the pool and hot tub water. The standard chlorine content of pool water should be between 1 and 2 ppm and pH between 7.2 and 7.8.
floor sweeping operation (physical cleaning of water) Sweeping the water is a physical operation that collects any particles and debris from the pool floor using a suction pump. Sweeping can be done manually or automatically by a person or a robotic sweeper.
Standard water temperature control (best water temperature) An ideal swimming pool for a building should have a standard temperature for swimming 365 days a year. Whether there is a meter of snow on the ground outside the house and the temperature is negative, whether the burning sun is shining and the temperature is 40 degrees Celsius. In maintaining the pool, the water temperature of the pool should always be ideal and not bother the swimmer. The standard temperature of the pool water should be between 29 and 32 degrees Celsius and the jacuzzi between 37 and 41 degrees Celsius. According to the swimmer's taste, the water temperature should be between the set level so that the swimmer does not feel cold from the low temperature or suffocation and numbness from the high water temperature.
Washing the filtration filters (Bekwash)
Water purification filters lose their proper efficiency after working for a while due to physical and chemical water purification. The act of washing is to clean the filter and wash the sand and silica inside the filter. Bekwash should be done at least once a week. Cleaning is one of the most important steps in swimming pool maintenance.
Dry and wet sauna function control (steam) A pool maintenance contractor should turn on the saunas and test their proper functioning during their weekly inspection. Checking and playing the engine room in the maintenance of the pool The pool maintenance contractor is responsible for visiting and checking the pool engine room equipment every week. The most important recalcitrant actions for the pool engine house: Calibration of thermostats The correct operation of the timer of the purification pumps No leakage from overflow sources, connections, etc. Smooth cleaning of pumps
