The filter of the hydraulic pressure line is installed after the pump and in the pressure line and is designed in such a way that against the working pressure of the system and the flow rate, they can trap fine pollution particles. The pressure line filter is often used to protect the sensitive components of the system, such as valves, against wear, jamming and sedimentation. Sensitive components are usually installed immediately after the filter. Since these filters are located after the pump, they help to protect the entire components of the hydraulic system and also remove the pollution created in the pump from the system, the pressure line filter must be able to withstand the working pressure of the system as well as the shocks applied by the pump. These types of filters have many differences with the return line filter.
use of Rexote Pressure Line
benefits of Rexrot Pressure Filter: Rexroth
Among the advantages of using this filter, the following items can be mentioned
Increasing the life of the system
Eliminating the possible risks that lead to the destruction of the operators and the system in case of excess particles.
Oil filtering With high pressure without pressure drop in the system, be careful that; The hydraulic filter prevents the components of your hydraulic system from being damaged by the contamination of oil or other hydraulic materials due to the use of particles. Every minute, approximately one million particles larger than 1 micron (0.001 mm or 1 micrometer) enter a hydraulic system. These particles can damage hydraulic system components because hydraulic oil is easily contaminated. So maintaining a good hydraulic filtration system will increase the life of a hydraulic filter. It helps to remove these particles and cleans the oil continuously. The performance of each hydraulic filter is measured by its pollution removal efficiency.
