The electric shutter is one of the most modern automatic doors that can be easily opened and closed with the help of a remote control. The components of this type of shutter include the motor, electric shutter blade (aluminum blades, polycarbonate blades, galvanized foamed blades), electric shutter rail, shutter housing, shutter roll, remote, control panel and shutter emergency power. This product has high efficiency, stylish appearance and ease of installation.
Electric shutters blade
The body of the electric shutter is formed by the blade, and in fact, it can be said that the blade is the most important part of this type of door. Blades exist in different genders and depending on the gender they have, they can have different characteristics. In general, the blade of the electric shutter prevents the loss of energy to a large extent and gives a beautiful appearance to the building when the door is closed.
Blades take up little space and due to the fact that they are rolled up when closed, they do not need much space around them and are very useful in small environments. Also, the strength and resistance of these blades are very high and they show great resistance against various environmental factors.
The advantage of electric shutter blades is that they can be ordered in different designs and colors. The factories that produce these blades provide the customer with a variety of colors and the person can choose the color and design he wants according to the appearance of his building. In addition, advertising can be done in different ways on these blades. Painting can be a suitable option for advertising, and when the door is closed, this advertisement is completely visible and covers a lot of space.
Electric shutter blades are made of aluminum using extrusion technique and then painted with anti-scratch electrostatic paint.
Electric shutters
At first, they produce the blades using the direct extrusion process. This method has a special place for shaping different metals and is used in many industries. After the extrusion process, the next steps of blade production begin, the first step of which is to wash the blade to remove all the fats and impurities from it and prepare it for painting.
After using electrostatic paint on clean blades, they should enter the paint baking oven and remain in this oven at a temperature of 180 to 200 degrees Celsius. This step is very important and after that the blades are sent to another place for cutting and assembly.
Types of electric shutters
The high variety of electric shutters shows the variety of blades used in it. Blades are produced in different types and used in different cases. Next, we will introduce the types of electric shutter blades.
Single and double -walled blades:
Usually, the strength of double-walled blades is higher, and their production process also requires more time, and for this reason, they have a higher price. In cases where high resistance is required, double-walled blades are used, but single-walled blades are also widely used in normal situations and are economical.
Foam blades:
In many cases, electric shutters may make noises when they are pulled up and down, which are annoying and will not look good in residential areas. Foam blades are usually used in the parking lots of different buildings. In this type of blades, due to the foam that is used between them, the noise is greatly reduced and the opening and closing of the door is done quietly and without any noise.
Hook blades in opposite:
In many cases, when installing electric shutters, it is necessary for the screw roll to be towards the inside of the shop. In this case, the general view of the blades is on their flat side. But when you intend to roll the screw to the outside, you need to use the hook blades in the opposite direction so that the appearance of the blades does not suffer.
Arc and flat blades:
Maybe you have come across electric shutters that are slightly arched. Curved blades are widely used in screws that are smaller, and flat blades should be used in screws that are larger in size.
Nano -Composite blade:
Blades are also classified according to gender and there are different types of them in different genders.
Galvanized blades
Galvanized blades are types of electric shutter blades that are produced from galvanized sheets and foam is used to produce them. All the blades that are galvanized are available in the market in the form of foam, and in terms of shear strength, bending or compression, they have a higher resistance than aluminum blades. The fact that these blades are foamed makes them better insulated against sound and heat, and for this reason, this type of blades is highly appreciated.
Steel blades
Steel blades are also other types of electric shutter blades that are available in the market in single-wall form, and the sheet used in them is very thick. The resistance of this type of blades against impact is very high and they are completely anti-theft. But the flaw in steel blades is their low rigidity and they cannot withstand wind pressure in high latitudes.
Roll Gate blades
Roll Gator blades also have a grid-like structure and are made from steel bar sections. In stores that tend to have some of the display window visible when the door is closed, this type of blade is considered a suitable option.
Shutter
Akrol shutter blade is one of the best brands of shutter blade that has high thickness, hardness and resistance. Among the advantages of this blade, we can mention the low noise when closing the shutter, anti-scratch surface, suitable weight and the possibility of ordering in different colors. Also, this company is one of the largest production lines in the aluminum industry in Arak city, which produces aluminum sheets with a width of 80 to 120 mm and specifications of single bridge, double bridge and four bridge. Other features of this blade include things such as:
resistant to cold and heat
plating with grade 1 material up to fifteen microns
it should be noted that the material of this blade has Standards such as ISO 9001-2008 and the national mark of Iran's standard.
Alper shutter blade which is one of the products produced by Asan company in Arak, is very popular among its customers. Also, this company has the most up-to-date casting, painting and packaging machines. Bandi is able to take a good position in the production of electric shutter blades, so that the advantages of Alper shutter blades include:
made of pure aluminum ingots Latest paint technology Anti-shock electrostatic
Possibility of ordering up to 140 colors
Possibility of ordering for shops and places with large openings
With a valid corporate warranty and reasonable price
He pointed out.
It should be noted that new chemical technologies and useful elements are used in making the Alper blade. Also, this blade has the mark of the National Organization for Standardization and the international approval of ISO 9001.
Other shutter blade brands that all have good quality and efficiency can be mentioned as follows:
Akpalus
Alvin
Alma
Quiral
Palarco
And other well-known brands are designed and produced, which can be selected from a wide variety of them, taking into account the specifications and features you want, as well as the required power, weight, and type.
p>