Plastic mold design is designed to produce different parts and products of plastic. As mentioned, the process of making plastic injection molds is much easier and shortening today, using your computer designs and programs, you can easily perform the process of making plastic injection molds and these steps more quickly than in the past. Get it. The process of making plastic injection molds according to the desired piece can be performed at different times. If the piece has high geometric and geometric complexity, it is needed to make it more time to make it. Today the use of plastic injection services to make plastic parts is very common.
- ابعاد قطعه ( طول و عرض و ارتفاع قطعه مورد نظر )
- ایجاد رزوه داخلی ( محل قرار گرفتن پیچ) در قطعه مورد نظر
- کیفیت سطح پلاستیک
- تیراژ تعداد قطعه پلاستیکی
- ایجاد حفره و یا ساختار شبکه ای و توری مانند بر روی قطعه پلاستیکی
- ایجاد حفره و یا محل های کشویی بر روی قطعه پلاستیکی
plastic injection mold and its sections
As mentioned, plastic parts are one of the most used parts in the world. It is possible to make these components by plastic injection molds. This device is made of two parts of injection and molding.
Injection section contains a variety of parts. There are two parts installed in this compartment, one being fixed and the other moving. Both sections include plastic injection mold. Form a mold of the outer part. The other format forms the inner part.
The process of making a plastic piece using plastic injection mold
To make a piece of plastic, the plastic material, which is called thermoplast, must be melted. This is done in the injection section. The material enters the machine through the funnel and combines with the ratios and then melted by the heater and then entered a funnel called the injection cylinder funnel. These substances are then gradually injected into the cylinder. The cylinder then directs these to the outer and inner molds and the material is injected between the two molds.
After a while these materials have been cooled and the moving part of the molding is separated and the plastic piece is ready.
Plastic Injection Mold Design
Design of excellent plastic injection molds for all kinds of plastic injection machinery requires very high knowledge and experience in the production of industrial molds; And to make these types of molds you must first design the plastic piece.
The design of plastic injection mold requires a specific calculations and adheres to high principles and standards. The design of the plastic injection mold is costly than the production of plastic piece and therefore must be done in the end. By adhering to and using these principles, the best plastic molds can be produced and marketed.
