production and distribution of light and heavy crane pulley in different sizes

Crane Hook

One of the most important spare parts of the crane that is installed instead of the hook is the grip. The grips allow operators to drain bulk loads. This tool is a great choice for lifting of irregular cargo, so you can see this tool in coal mines and precious stones, steel factories and waste segregation. Choosing the right alloy to make the grip can extend the life of this piece.

crane magnet

This piece is also one of the spare parts of the crane that is attached to the hook. The operator can separate and lift a variety of metals using a crane magnet and stimulation intensity control. This tool is widely used for lifting loads in steel factories and waste separation. This tool is also destroyed over time and needs to be replaced. If you feel this piece does not work well the past, you must certainly go to the crane spare parts vendors and replace it with a new piece.

Crane Hook

One of the most important spare parts of the crane, which is one of the most important loading tools, is hook. The hooks are always in danger of rusting and therefore have to be replaced for a few years. The hook is one of the most sensitive members of the crane and determining the safety of working with it because of the highest possible tolerance. Proper design of hooks and the use of appropriate alloys are very important in their production. It may be unbelievable, but the hook is very effective on load lifting power and can reduce the power of your crane if incorrectly selected.

Hydraulic Crane Hydraulic Gear

Inside the crane, hydraulic motors are responsible for raising loads, winches and canvas. The power generated by the hydraulic motor is transferred to the canvas and winch through the cast iron gears (HB300-350) and cargo lifting. These gears are always exposed to wear and therefore need to be replaced. For this reason, the gear of the hydraulic motor can be found among the spare parts of the crane. Crane gears can be divided into three types, two -edge gears, single -edge gears and no -edge gears according to the edge form. The role of the edge of guidance and preventing the car body is destruction.

Crane Inhibition Base

One of the most essential spare parts of the crane is the base of the crane. One of the gears of hydraulic motor engine is inserted inside the crane inhibition. This restraint base connects to the main canvas beam and is transferred to the main beam through the base of lifting force and finally the canvas and lifting load. In some cases, the piece will also be damaged due to the wear of the gears or rupture of the straps and will need to be replaced. The material used for this piece is selected from screw -resistant steels. In addition to transferring power, this piece also holds the task of keeping the winch and canvas and should not be easily dismantled from the boiling site. The breakdown of this piece causes the crane mechanical arm to fall. Most of the component is disrupted by the excessive loading load. If you see it in this piece, please visit the crane spare parts immediately.

Drama & Drama Lock

The drum is a piece of crane, which is wrapped around the towing wire and is considered to be a spare parts of the crane. This piece of cast iron is also installed on a steel and even all welding on the vinches or canvas depending on the user's needs. If I have a surface, it can damage the towing wire. If your towing wire is torn without severe loads, it is certainly a problem with the drum and this piece needs to be replaced. I have a lock of the drum system, which is tasked with increasing the length of the rope. The failure of this piece threatens the application of the system in general. Types of crane spare parts and even drums are produced by many companies.

types of crane pulley

is one of the most well -known spare parts of the pulley. After the towing wire is opened from the pulley drum, the parts that help the towing wire move in a straight path. The pulleys are divided into a variety of steel pulleys, gray cast iron, duct iron and plastic. Plastic pulleys and gray cast iron cause the least damage to the towing wire, they are very weak against large loads and break their edges. Therefore, they are used for cranes whose lifts are less used. In high lifting cranes, the use of stainless steel pulleys and duct castles is more common and the life of these pulley is longer. Pulls need lubrication and are subjected to spare parts because they are destroyed by friction over time.

crane cabin

Classification of this section is surprising among the spare parts, but it can also be damaged. This problem arises when the crane is left or after lifting the cargo of the cabin or winches with a large radius. The cabin is similar to the heart of the crane and contains the main parts of the crane such as hydraulic motor and lift jacks. In case of multiple components of the cabin, the cabin will be fully or partially replaced.

Crane towing wire

One of the most important spare parts of the crane that is most replaced is the towing wire. The towing wire is a rope with a steel brain that comes from thousands of steel strands. The lack of lubrication of the pulley and the drum is one of the causes of towing wire destruction. The towing wire also loses and is damaged due to its heavy and over -power loads. The towing wires are made in different types and each towing wire is used to withstand a type of load.

crane coupling

is one of the main spare parts of the crane. The hydraulic motor provides the driving force needed for loading and cabinet lifting. Coupling is a device that transfers the force of diesel burning to the engine shaft. Without coupling, the hydraulic motor will not have the power, resulting in neither loading nor rotating. This piece rarely breaks completely, but in some cases it loses its symmetry, causing many problems.

buffer or under the crane barrel

is one of the spare parts of the buffer. The task of buffer control is to control loads and cabin periods. Without this piece, the cabin will have a cabinet when lifting, which is very dangerous. Buffer is one of the components of a crane that rarely break or replace.

Winch Crane

Winches are also part of the spare parts of the crane. All loading tools are included in Winches. Winc is placed on the canvas and many loads of lifting are entered through the towing wire. Various winch pieces are welded and only destroyed by disruption from the boiling site. Winches have different lengths and dimensions that change based on the crane brand.

canvas of crane

The canvas is one of the spare parts of the crane and its mechanical arm. The canvas between the restraint and winches is located. The canvas length determines the height of lifting. This spare piece only needs to be replaced by caries and failure.

Management: Mr. Mohammad Dadashzadeh